QUALIFICATION SPECIFICATIONS ILM Level 3 Diploma in Leadership and Management QS/L3DLM/0510
Circulation of Qualification s These Qualification s are provided to centres that are approved by the Institute of Leadership and Management (ILM) to offer these qualifications. They should not be circulated outside of the centre. There are specific sections that are designed to be copied to candidates eg Assessment Notes for Candidates. It may also be useful to make available the Programme Outline and Unit s. This information should be extracted from the Qualification s rather than providing candidates with the complete document. Institute of Leadership & Management (ILM) Every effort has been made to ensure that the information contained in this publication is true and correct at the time of publication. ILM products and services are subject to continuous development and improvement and the right is reserved to change products and services from time to time. ILM cannot accept liability for loss or damage arising from the use of information in this publication. The Institute of Leadership and Management (ILM) 2010 ILM is part of the City & Guilds Group and is a company limited by guarantee no 601049. Registered Charity 248226
Contact ILM www.i-l-m.com The ILM Customer Service and Membership Teams are dedicated to providing the very best in customer care. If you need guidance on any aspect of leadership and management products and services, including fees, please contact ILM. ILM Centres T +44 (0)1543 266867 F +44 (0)1543 266893 E customer@i-l-m.com ILM Membership T +44 (0)1543 266886 F +44 (0)1543 266811 E membership@i-l-m.com QS/L0AAA/0000
PAGE 1 ILM LEVEL 3 DIPLOMA IN LEADERSHIP AND MANAGEMENT (QCF) [Qualification No. 500/3626/9] Note: This qualification specification should always be read in conjunction with the Supporting Notes for ILM VRQs document which is downloadable from ILM website or it can be accessed via your Quality Manager/External Verifier or from the ILM Customer Services Team by emailing at customer@i-l-m.com
PAGE 2 Table of Contents ILM Level 3 Diploma in Leadership & Management Qualification Overview 3 Occupational Competency Requirements 5 Assessment Guidance 6 APPENDICES Appendix A Unit s 7 Appendix B Assessments for mandatory units 83 Appendix C Action Learning in Theory and Practice 95
PAGE 3 QUALIFICATION OVERVIEW: ILM Level 3 Diploma in Leadership & Management Purpose of the qualification Aims to give practising or potential first line managers the widest choice for their formal development in this role. The qualification does this by developing a very wide range of basic management skills and assisting participants in gaining the comprehensive knowledge required by a first line manager. The qualification also develops both understanding and application of leadership skills using action learning. Progression routes Credit Value Induction Tutorial Support Guided Learning Hours this range is based on the guide learning defined for each unit and includes any additional time for induction and tutorial support To be completed within Structure The qualification provides opportunities for progression to other qualifications such as the: L4 Qualifications in Management or Leadership Level 5 Qualifications in Management or Leadership; or Leadership and Management Minimum 37 credits 2 hours At least 10 hours Minimum 150 GLH 3 years Mandatory Units Credit Value M3.02 Understanding change in the workplace 2 credits M3.03 Planning change in the workplace 2 credits M3.04 Achieving objectives through time management 1 credit M3.10 Introduction to leadership 2 credits M3.36 Leading a team effectively 2 credits M3.37 Developing own leadership capability using action learning 10 credits Optional Units (Learners need to obtain Credit Value minimum 18 credits from this group) M3.01 Solving problems and making decisions 2 credits M3.05 Writing for business 1 credit M3.06 Managing creativity and innovation in the workplace M3.07 Obtaining information for effective management 1 credit 2 credits M3.08 Managing customer service 1 credit M3.09 Giving briefings and making presentations in the workplace 1 credit M3.11 Building the team 1 credit M3.12 Motivating to perform in the workplace 2 credits M3.13 Developing yourself and others 2 credits
PAGE 4 M3.14 Managing conflict in the workplace 1 credit M3.15 Managing stress in the workplace 1 credit M3.16 Managing the employment relationship 2 credits M3.17 Recruiting, selecting and inducting new staff in the workplace 3 credits M3.18 Coaching and training your work team 2 credits M3.19 Providing quality to customers 2 credits M3.20 Planning to work efficiently 2 credits M3.21 Organising and delegating 1 credit M3.22 Managing projects 2 credits M3.23 Managing health and safety at work 3 credits M3.24 Understanding organisations in their context M3.25 Understanding culture and ethics in organisations 2 credits 2 credits M3.26 Managing performance 1 credit M3.27 Working with costs and budgets 1 credit M3.28 Managing the efficient use of materials 1 credit M3.29 Managing the effective use of equipment M3.30 Understanding the communication process in the workplace 1 credit 1 credit M3.31 Influencing others at work 1 credit M3.32 Communicating one-to-one at work 1 credit M3.33 Effective meetings for managers 2 credits M3.34 Understanding workplace information systems 1 credit M3.35 Marketing for managers 1 credit
PAGE 5 OCCUPATIONAL COMPETENCY REQUIREMENTS FOR THE LEVEL 3 DIPLOMA IN LEADERSHIP & MANAGEMENT It is the centres responsibility to ensure that they have competent and suitably qualified staff involved in delivering, quality assuring and/or assessing qualifications. The table below shows the occupational competence requirements of tutors, internal quality assurors and/or assessors. Given that occupational competence requirements will vary greatly between lower and higher level qualifications, this table will highlight if there is an additional requirement of any qualification specific occupational competency. Tutors Occupational Competence Requirements A thorough knowledge and understanding of the qualification(s). Relevant and credible experience in the field of the relevant qualification. A qualification in support of assessment and internal quality assurance. Evidence Indicators Have a relevant qualification in the subject area that must be at equal or higher level or have an equivalent qualification. Show evidence of information or documents prepared for learners such as a learner journey plan (SoW), lesson plan, learner guidance notes, tutorial support plan etc. for the ILM qualification. Show evidence of participation in Continuing Professional Development (CPD) in relation to the relevant field and qualification requirements. Be able to prove that they have current experience of delivering training appropriate to the level and subject area of this qualification Ideally hold a valid and recognised teaching/training qualification. Internal Quality Assurors and/or Centre Assessors Occupational Competence Requirements A thorough knowledge and understanding of the relevant qualification(s). Relevant and credible experience in the field of the relevant qualification. A qualification in support of assessment and/or internal quality assurance. Experience and a working knowledge of the operational and assessment processes for the relevant qualification. Evidence Indicators Have a relevant qualification in the subject area that must be at equal or higher level or have an equivalent qualification. Show evidence of carrying out CPD in order to familiarise themselves with current standards for assessment/verification in the subject area of this qualification. Demonstrate clear evidence of current experience in quality assurance and/or assessment appropriate to the level and subject area of this qualification Ideally hold an assessment qualification (e.g. TAQA or equivalent) Demonstrate an understanding of the organisation s management centric policies, procedures and practices. Demonstrate knowledge and understanding of ILM s quality assurance policy, procedures and requirements.
PAGE 6 ASSESSMENT GUIDANCE FOR THE LEVEL 3 DIPLOMA IN LEADERSHIP AND MANAGEMENT MANDATORY UNITS A brief introduction on ILM s Assessment Strategy can be found in Supporting notes for ILM VRQs. For detailed information, centres are encouraged to refer to the various assessment guides that are available from the ILM Customer Services Team at customer@i-l-m.com or refer to the Centre Manual (www.i-l-m.com/centres.aspx). This segment gives you specific guidance around assessments for the Level 3 Diploma in Leadership and Management mandatory units. Appendix B in this document outlines the assessments and mark sheets for the mandatory units in this qualification. Centres should use the prescribed assessments. However some flexibility is permitted. In exceptional circumstances and to meet a specific need a centre may deviate from the prescribed assessment subject to prior written approval from ILM. Equal opportunities issues are relevant to all units of study and these aspects should be explicitly addressed in the delivery and assessment of this programme. The table below gives a brief overview of the units and assessment(s): Unit M3.02 Understanding change in the workplace M3.03 Planning change in the workplace M3.04 Achieving objectives through time management M3.10 Introduction to leadership M3.36 Leading a team effectively M3.37 Developing own leadership capability using action learning Assessment Change Management Report Reflective Review Leadership Action Plan and Learning Log Learners are likely to come from a variety of backgrounds, in that they will have had different training and work experiences, differing ambitions and opportunities, centres therefore can encourage learners to select topics for assessment in their own organisation and/or area of work, (or within another organisation if they are currently unemployed or self employed). They should ensure learners are able to present their work as simple and clearly as possible. An approximate word count is given for each assessment. This should only be seen as a guide to help achieve a balanced piece of work. Centres must ensure that learners adequately complete all sections of the assessment. To ensure all learning outcomes are assessed, section passes have been provided in the assessments. To assist this practice, ILM normally applies a pass mark of 50% in each section as reflecting a minimum pass. Centres must note that compensation between learning outcomes is not allowed in any QCF unit.
PAGE 7 A P P E N D I X - A UNIT SPECIFICATIONS FOR THE LEVEL 3 DIPLOMA IN LEADERSIP & MANAGEMENT
PAGE 8 Level: 3 Credit value: 2 Solving problems and making decisions (M3.01) Learning outcomes (the learner will) 1 Know how to describe a problem, its nature, scope and impact Assessment criteria (the learner can) 1.1 Describe a problem, its nature scope and impact 2 Know how to gather and interpret information to solve a problem 2.1 Gather and interpret information to identify possible solutions to a problem 3 Know how to solve a problem 3.1 3.2 Briefly summarise the options, providing facts and evidence, not just opinion Use at least one simple decision making technique to evaluate options to arrive at the best solution 4 Know how to plan the implementation and communication of decisions 4.1 4.2 Plan the implementation and communication of the decision Briefly discuss which monitoring and review techniques could be used to evaluate outcomes Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of solving problems and making decisions as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C2, C5, C6, F6 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Council for Administration (CfA) Business Management
PAGE 9 Name of the organisation submitting the unit Availability for use Institute of Leadership & Management Restricted to ILM and WAMITAB Units available from 01/01/2008 Unit guided learning hours 11 Additional Guidance about the Unit Indicative Content: 1 Simple ways to recognise, investigate and analyse problems Objective setting in relation to problem Brainstorming and creative thinking techniques 2 Difference between data and information How to calculate and use simple averages and basic summary statistics How to prepare and use grouped data and tables Interpretation of charts and diagrams Methods of indexing, referencing and structuring qualitative information 3 4 How to evaluate options The importance of adequate and relevant information for effective decision-making Identification of what information is relevant to specific decisions Simple decision making techniques Effective presentation of a case i.e., providing facts and evidence, not just opinion Monitoring and review techniques to evaluate outcomes of problem solving activities
PAGE 10 Title: Understanding change in the workplace (M3.02) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1. Understand change in an organisation 1.1 1.2 1.3 Explain the benefits of innovation and change for the organisation Identify the barriers to change and innovation in the workplace and explain practical ways of overcoming these barriers Explain why communication is important in successful implementation of change 2. Understand the effects of change on people and finance in an organisation 2.1 Explain possible human and financial effects of change upon people, departments and the organisation Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of Understanding Change as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C5 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM and WAMITAB Units available from 01/01/2008
PAGE 11 Unit guided learning hours 11 Additional Guidance about the Unit Indicative Content: 1 The benefits of change and the consequences of not changing The role of change in the survival and prosperity of organisations Concepts of creativity and innovation and their significance for organisational success and change management The role of communication in successful implementation of change Barriers to change and innovation how to identify them and other difficulties in implementing change Means of overcoming barriers and difficulties including unfreezing and freezing techniques Methods to monitor and control progress of change against plan, including use of Gantt charts, network planning 2 Change fatigue and its adverse effects Ways to organise and co-ordinate resources and activities to achieve planned change Simple introduction to the difference between fixed and variable costs Direct and indirect aspects of change human and financial effects upon other people, departments and organisations
PAGE 12 Title: Planning change in the workplace (M3.03) Level: 3 Credit value: 2 Learning outcomes (the learner will) 1 Understand the forces for change in an organisation Assessment criteria (the learner can) 1.1 Identify the forces that may require own organisation to change by conducting a simple PESTLE and/or SWOT analysis 2 Understand planning for change in an organisation 2.1 2.2 2.3 2.4 Give an example of change required in the workplace reflecting the SWOT and/or PESTLE analyses Use a technique for planning change within the context of the example given Identify relevant human and financial factors in the consideration of change within the context of the example given Explain how to communicate with and involve people to facilitate effective change 3 Understand continuous improvement in an organisation 3.1 3.2 3.3 3.4 3.5 Explain the importance of quality awareness and the need to continuously improve the organisation Identify the organisation s quality standards Use a continuous improvement tool or technique relevant to the workplace Explain ways of involving the team in quality and continuous improvement Discuss ways to evaluate continuous improvement activities Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of planning change as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C5 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate)
PAGE 13 Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 11 Additional Guidance about the Unit Indicative Content: 1 Simple PESTLE analysis Organisational SWOT analysis 2 The principles of change management Basics of system theory and process design Methods of planning for change Use of Gantt charts, network planning as tools for planning change Identification of human and financial factors in the consideration of change Differentiate between fixed and variable costs The importance of communication and involving people to facilitate effective change 3 The importance of quality awareness and the need to strive for continuous improvement Service standards as appropriate to own organisation Quality circles, benchmarking, Kaizen The importance of commitment and loyalty to the organisation Ways to involve people in quality and continuous improvement, including suggestion schemes/role models Ways to evaluate continuous improvement activities
PAGE 14 Title: Achieving objectives through time management (M3.04) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1. Know how to use effective time management to prioritise and achieve objectives 1.1 1.2 1.3 1.4 Set SMART objectives for own workload, list them in order of priority and establish appropriate time scales for their achievement Plan the achievement of the objectives using an established time management technique Identify constraining or limiting factors that could hinder the achievement of any one of these objectives Briefly explain the monitoring techniques for any objective Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of achieving objectives through time management as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: A2, F1 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 7
PAGE 15 Additional Guidance about the Unit Indicative Content: 1 How to set SMART objectives Setting priorities to achieve objectives Urgency vs. importance when prioritising Negotiating techniques Time logs Constraining or limiting factors Application of simple planning and monitoring techniques Methods to measure achievement of objectives
PAGE 16 Title: Writing for business (M3.05) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Know how to write a report 1.1 1.2 1.3 Write a report to meet specified standards Incorporate basic statistics and visual material in the content or in an appendix Use effective and appropriate tone, language and level of formality in a report Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of writing for business as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 6 Additional Guidance about the Unit Indicative Content:
PAGE 17 1 The value of the written word in avoiding errors and providing permanent records The purpose and conventions of letters, memos, reports and e-mails in use within the organisation Planning for writing, including use of available information and the needs of the recipient Image, structure, layout conventions including house styles The importance of objectives and the reader Report structures to meet standard and specific requirements (ILM and/or incompany formats) Incorporation of statistics and visual materials, and the use of appendices to enhance understanding Effective and appropriate use of tone, language, level of formality in a range of cases Supervised practice or simulation to develop the ability to apply knowledge and skills
PAGE 18 Title: Managing creativity and innovation in the workplace (M3.06) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand the importance of creativity and innovation for the organisation 1.1 1.2 1.3 1.4 Use a technique to encourage creative ideas amongst team members Explain barriers to creative thinking and resistance to innovation within the team Explain how to gain the commitment of others in moving creative ideas forward Evaluate creative and innovative ideas and make reasoned recommendations to managers and others Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of creativity and innovation as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C2 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 7 Additional Guidance about the Unit Indicative Content:
PAGE 19 1 The importance of creativity and innovation for organisational success Auditing techniques to assess an organisation s ability to innovate A range of different techniques for encouraging creative ideas amongst team members (eg: brainstorming, nominal group technique, TRIZ, SCAMPER, synectics, random juxtaposition) Barriers to creative thinking and resistance to innovation within organisations Methods of leading others in a creative ideas generation and assessment process Evaluation techniques to assist making reasoned recommendations to managers and others
PAGE 20 Title: Obtaining information for effective management (M3.07) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Know how to gather information 1.1 Use basic data collection techniques to gather information from external, internal and internet sources 2 Know how to validate and analyse information and draw conclusions 2.1 2.2 Check the validity and accuracy of information gathered Analyse information gathered and draw conclusions 3 Know how to design and analyse questionnaires 3.1 3.2 3.3 3.4 Design a simple workplace questionnaire that includes a minimum of four different types of questions Describe a representative sampling technique Briefly describe how the questionnaire could be administered Describe a simple technique for analysing the results of the questionnaire Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of obtaining information as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: D1, F1 Links to SFEDI 2006 NOS: YS4 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the SFEDI Council for Administration (CfA) Business Management Institute of Leadership & Management
PAGE 21 unit Availability for use Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 10 Additional Guidance about the Unit Indicative Content: 1 The value of valid, accurate and timely information to the organisation Basic means of data collection questions, observation, surveys, source records Basic questioning techniques How to prepare and use surveys and questionnaires Constraints on the availability of and access to data, including legal issues How to validate data and information 2 Means of determining the value (validity, accuracy, efficiency, effectiveness) of information sources Internal sources documentation, standard reports, etc External published sources (including Government statistics) Accessing the Internet, use of search engines, usefulness of web-based materials Obtaining information from the internet employing Boolean search terms (the words and, or, not) Analysing information Reaching conclusions 3 Application of questionnaires in the workplace Basic representative sampling techniques Recognition of realistic response rates to questionnaires How to design effective questions and response options The importance of structure and appearance in questionnaire design Pilot surveys to test reliability and validity Administration of questionnaires by post, telephone or interview Simple techniques for analysing the results of questionnaires
PAGE 22 Title: Managing customer service (M3.08) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand basic customer service 1.1 1.2 1.3 Briefly describe at least two legal rights of customers Briefly describe two of the organisation s commitments to customers Briefly describe the manager s responsibilities in relation to customer service 2 Know how to care for the customer 2.1 2.2 2.3 2.4 Identify an external and an internal customer of the organisation Describe how customer needs are identified Explain how customer service standards and procedures are used to meet customer needs Explain how they could monitor customer service against the standards set Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of meeting customer needs as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: F6, F8 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Council for Administration (CfA) Business Management Institute of Leadership & Management
PAGE 23 Availability for use Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 7 Additional Guidance about the Unit Indicative Content: 1 How to identify the internal customer chain, external customers, and potential customers Techniques for identifying customer needs Methods of establishing relevant customer care standards and procedures Use of appropriate planning and quality systems to monitor and fulfil customer care standards Methods to establish and maintain effective relationships with customers at all stages 2 The legal rights of customers (law of contract, sale of goods and services, trade descriptions, etc) Organisational commitments to customers (contract terms, warranties and guarantees, service standards, etc) Methods of identifying customer requirements and expectations Standards and benchmarks Manager s responsibilities and authority in relation to customer service
PAGE 24 Title: Giving briefings and making presentations in the workplace (M3.09) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1. Know how to conduct a briefing or presentation 1.1 1.2 1.3 1.4 1.5 1.6 1.7 1.8 1.9 Select appropriate information in line with the objectives of the briefing or presentation Logically structure the content of the briefing or presentation Introduce an appropriate management topic clearly Use appropriate presentation techniques and aids to enhance understanding of the topic of briefing or presentation Present information clearly Display confidence in the subject matter Keep to time Use feedback to check understanding Design a simple evaluation form Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of briefing and presentation skills as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM
PAGE 25 Units available from 01/01/2008 Unit guided learning hours 6 Additional Guidance about the Unit Indicative Content: 1 Selection of relevant information content How to plan and prepare effectively for briefings (account for Purpose; Audience; Content; Form) Formal and informal presentation skills including platform techniques and visual aids How to evaluate briefings/presentations Use of feedback to check understanding Reporting back to management after briefing The value of various methods of data presentation tables, graphs, charts, diagrams, Gantt charts, etc Evaluation of alternative methods to select the most appropriate for a given situation How to construct a range of data presentation methods The use of spreadsheets for the creation of graphs, charts and diagrams How to interpret information contained in charts and diagrams, and explain this to others Supervised practice or simulation to develop the ability to apply knowledge and skills
PAGE 26 Title: Introduction to leadership (M3.10) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1. Understand leadership styles 1.1 1.2 Identify the factors that will influence their choice of leadership styles or behaviours in workplace situations Explain why these leadership styles or behaviours are likely to have a positive effect on individual and group behaviour 2. Understand leadership qualities and review own leadership qualities and potential 2.1 2.2 Assess own leadership behaviours and potential in the context of a particular leadership model and own organisation s working practices and culture, using feedback from others Describe appropriate actions to enhance own leadership behaviour in the context of the particular leadership model Additional information about the unit Unit purpose and aim(s) To develop an introductory knowledge and understanding of leadership as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: B6 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM
PAGE 27 Units available from 01/01/2008 Unit guided learning hours 6 Additional Guidance about the Unit Indicative Content: 1 Differences and similarities between leadership and management, and the need for each of them Range of at least three leadership models (such as trait, contingency, situational, distributive, servant oblique leader, transactional/transformational) and their significance for task performance, culture and relationships Leadership behaviours and the sources of power 2 Identification, development and appropriate choice of personal leadership styles and behaviours The role of trust and respect in effective team leadership Supervised practice or simulation to develop the ability to apply knowledge and skills
PAGE 28 Title: Building the team (M3.11) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand how to develop and maintain trust at work 1.1 1.2 Explain behaviours which could develop and maintain trust at work Explain why confidentiality is important in building and maintaining trust in the team 2 Know how to build the team 2.1 2.2 Give one example of a group and one example of a team within the workplace. Justify the classification of examples given Briefly describe the stages of an established model of group formation Explain how a manager could benefit from knowing team members preferred team roles Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of building the team as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C5, C6 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM and WAMITAB Units available from 01/01/2008
PAGE 29 Unit guided learning hours 5 Additional Guidance about the Unit Indicative Content: 1 The nature of formal and informal working relationships Role of open communications and the need to keep people informed, in creating effective working relationships Range of internal and external contacts Differences between people, and the effects on relationship building Differences in organisational culture, and the effects on relationship building at work Social skills appropriate to the workplace Range of behaviours which develop, maintain and destroy trust at work The importance of maintaining confidentiality in the workplace 2 Characteristics of groups and teams the differences, examples within the workplace Tuckman s theory of group formation How to identify team roles (eg Belbin) and the uses and implications for managers Building a balanced team to achieve objectives
PAGE 30 Title: Motivating to perform in the workplace (M3.12) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand the value of assessing performance to meet organisational and individual needs 1.1 1.2 Explain the value of formal and informal performance assessment in the workplace Identify ways that could ensure fair and objective formal assessment 2 Know how to motivate the team to improve performance in the workplace 2.1 2.2 Outline the factors that influence how people behave at work Explain how to apply one basic recognised theory of motivation to team members 3 Understand the value of feedback in the workplace 3.1 3.2 Explain the importance of feedback to improve communication and performance Compare the effectiveness of different types of feedback Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of motivating the team to perform as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: B6, D6 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM and WAMITAB
PAGE 31 Units available from 01/01/2008 Unit guided learning hours 10 Additional Guidance about the Unit Indicative Content: 1 The purpose and value of formal and informal performance assessment at work (formal assessment includes performance review/appraisal) Ways to ensure fair and objective assessment Preparations necessary for effective, valid and reliable assessments Feedback techniques following assessment Roles and responsibilities of individuals in the performance assessment process Appropriate assessment records How to conduct formal appraisals 2 Overview of the factors influencing behaviour at work Basic theories of motivation and their application to teams and individuals Styles and patterns of behaviour at work Range of techniques to motivate individuals and monitor performance Positive approaches to offset negative attitudes in the workplace 3 The importance of feedback to improve communication and performance Types of feedback and their relative values in communication (visual, written, oral, aural) Use of feedback to improve the performance of individuals in the workplace How to use feedback techniques (formal/informal; positive/negative; timescale; format) How to elicit feedback from others to improve own performance
PAGE 32 Title: Developing yourself and others (M3.13) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Know how to identify development needs and develop self and others to achieve organisational objectives 1.1 1.2 1.3 1.4 1.5 1.6 Use at least one simple technique for identifying own development needs and the development needs of one other member of the team Identify own learning style(s) and the learning style(s) of one other member of the team Briefly analyse two learning/development options to meet need(s) of self and one other member of the team Identify barriers to learning and explain how these barriers can be overcome Identify support mechanisms for the development of self and one other member of the team Describe methods used to monitor the development of self and one other member of the team Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of developing self and others as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: A2, C6, D7 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM and WAMITAB
PAGE 33 Units available from 01/01/2008 Unit guided learning hours 11 Additional Guidance about the Unit Indicative Content: 1 Use of job description, matching to own CV Personal SWOT analysis Organisation s objectives and development plans and significance for own development Obtaining feedback on performance from line managers and colleagues Simple training needs analysis using outcomes of SWOT and PESTLE analyses Identification of preferred learning styles The importance of taking responsibility for own personal development Value of learning and the importance of encouraging a commitment to learning Identification of potential development opportunities Barriers to learning, and methods to overcome them Development plans including timescale and resource implications Available support mechanisms How to compile learning logs and records of activities
PAGE 34 Title: Managing conflict in the workplace (M3.14) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Know how to resolve conflict in the workplace 1.1 1.2 1.3 1.4 1.5 Identify causes of conflict at work Describe the stages in the development of conflict Explain the effects of conflict on individual and team performance at work Explain any recognised technique a manager could use to minimise and resolve conflict in the workplace Describe how a manager could create harmony at work and engender a positive atmosphere in order to minimise the adverse effects of conflict Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of managing conflict and supporting individuals as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: D1 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 4
PAGE 35 Additional Guidance about the Unit Indicative Content: 1 Possible causes of internal conflict, eg: personal versus business/enterprise objectives/values Causes of interpersonal friction at work, including bullying and harassment The effects of conflict on performance and the individual at work Stages in the development of conflict The manager s responsibility in minimising and resolving conflict, and techniques to achieve this Ways to create harmony at work and engender a positive atmosphere
PAGE 36 Title: Managing stress in the workplace (M3.15) Level: 3 Credit value: 1 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand how to manage own stress and minimise stress in others 1.1 1.2 1.3 1.4 Examine the causes and impact of stress in the organisation Describe the symptoms of stress in self and in others Explain one practical stress management technique Outline management responsibilities and actions in relation to work-related stress in the team 2 Know how to support individuals in the team 2.1 Explain how to decide when to provide advice, mentoring or counselling to support individuals in the workplace Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of managing stress as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: C6 Links to SFEDI 2006 NOS: YS3, OP5, OP8 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the subject/sector classification system Name of the organisation submitting the unit Availability for use SFEDI Council for Administration (CfA) Business Management Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008
PAGE 37 Unit guided learning hours 8 Additional Guidance about the Unit Indicative Content: 1 Causes and impacts of stress at work Symptoms of stress in self and in others Implications of stress for workplace and non-work activities/relationships Implications and effects of stress for individuals and organisations Management responsibilities in relation to work-related stress Simple practical stress management techniques Sources of available support for stress sufferers Action planning and review techniques 2 Definitions of counselling, advising and mentoring and when to use each of them to support individuals Principles of counselling Mentoring, and the mentoring cycle Range of available counselling and support mechanisms
PAGE 38 Title: Managing the employment relationship (M3.16) Level: 3 Credit value: 2 Learning outcomes (the learner will) Assessment criteria (the learner can) 1 Understand diversity in the workplace 1.1 1.2 1.3 1.4 Identify the main provisions of statutory requirements for the employment relationship, discrimination at work and fair employment Identify the organisation s employment policies and procedures that could guide the first line manager in managing diversity in the workplace Explain the importance of diversity in the workplace Explain the consequences of noncompliance with diversity policies for own work area and for the organisation 2 Know how to maintain discipline in the workplace 2.1 2.2 2.3 2.4 Identify the organisation s employment policies and procedures that could guide the first line manager in dealing with disciplinary issues Describe how they could monitor discipline in the workplace Briefly describe the legal aspects of the disciplinary process Review own ability to maintain discipline in the workplace Additional information about the unit Unit purpose and aim(s) To develop knowledge and understanding of the employment relationship as required by a practising or potential first line manager. Unit review date 31/12/2014 Details of the relationship between the unit and relevant national occupational standards or professional standards or curricula (if appropriate) Links to Management & Leadership 2008 NOS: B11, D1, D3 Assessment requirements or guidance specified by a sector or regulatory body (if appropriate) Support for the unit from a sector skills council or other appropriate body (if required) Location of the unit within the Council for Administration (CfA) Business Management
PAGE 39 subject/sector classification system Name of the organisation submitting the unit Availability for use Institute of Leadership & Management Restricted to ILM Units available from 01/01/2008 Unit guided learning hours 7 Additional Guidance about the Unit Indicative Content: 1 Definition of diversity and its impact on the organisation and its activities Legislation as it affects employment sex, age, ethnicity, disability, etc Own organisation s policies and procedures Significance of diversity in the market place The consequences of non-compliance for own work area and the organisation 2 Organisational employment policies, (eg relating to time-keeping, absenteeism, conduct, level of performance, attitude and behaviour, gross misconduct) Records and other means to support and monitor the disciplinary process Legal aspects of disciplinary processes