JADAVPUR UNIVERSITY FACULTY OF ENGINEERING & TECHNOLOGY IMPORTANT NOTICE Counseling and Spot admission in PG & Technology-2016 1. Counseling and Spot adm ission will be conducted against existing vacant seats ( as indicated separately) will be conducted on 14.09.2016 in Gandhi Bhavan of Jadavpur university, Jadavpur cam pus. Reporting tim e to Gandhi Bhavan 10-30 am. The candidates will not be allowed to enter the hall after 1 pm. under any circum stances. 2. All the applicants (applied during the period from 20 t h April, 2016 to 6 t h M ay, 2016) including those who have taken adm ission in Jadavpur University, will be allowed to participate in the Counseling and Spot admission process. However, eligibility of all the candidates who will take part in Counseling and Spot adm ission process, will be verified from originals. Admission will be offered on the basis of m erit am ong the candidates who will t ake part in this Counseling and Spot admission process only and available seats at the time of accepting offer at that particular m oment. The candidates will not be allowed to change the specialization/departm ent once the adm ission offer is accepted during Counseling and Spot admission process, under any circum stances. Relevant Eligibility Criteria FOR P.G. COURSES IN ENGG./TECH./ARCH./PHARM COURSES Category (A) GATE/GPAT: Obtained Bachelor s degr ee in Engg./Tech./Arch./Pharmacy Or M.Sc./MCA as given in the Schedul e below with at least averag e Grade point 6.75 (60%) for General Candidate or Grade point 5.25 (45%) for SC/ST/PW D Candidate and qualified through GATE/GPAT having valid GATE/GPAT Score. Pleas e not e that M.Sc. in Physics / Chem istry / Material Sc. / Electronics Sc. Candidates are eligible for Master of Material Course and MCA Candidates are eligible fo r Master of Software Course. OR Passed Mem bership/associate Mem bership Exa mination in the appropriate discipline conducted by the following professional bodies, like Institution of Engineers (India)/Indian Institute of Architects/ Indian Institute of Chemical Engineers/ Institute of Elect ronics Telecomm unication Engineers approved b y Govt. of India, with at least averagegrade point 6.75 (60%) for General Candidate or Grade point 5.25 (45% ) for SC/ST/PW D Candidate and qualified through GATE having valid GATE/GPAT Scoreare eligible for adm ission to PG courses in Engg./Tech./Arch./Pharm. as GATE category candidates. Category (B) Sponsored: Obtained Bachelor s degr ee in Engg./Tech./Arch/Pharm acy or M.Sc./MCA as given in the Schedul e b elow with at least average Grade point 6.75 (60%) for General Candidate or Grade point 5.25 (45%) for SC/ST/PW D Candidate & m inimum 1 (one) year exp erienc e after pass ing the B.E./B.Tech/B/Pharm/B.Archexamination (for PG in Civil course minimum 2 (two) years)duly sponsored by Industry / Institute/ Govt. Depts. Rel evant exp erienc e shall b e counted aft er passing BE/B.Tech./B.Arch/B.Pharm or M.Sc. degr ee and as on last date of online submission of Application Form, i.e., 13 t h May, 2016. Rel evant exp eri enc e c ertificate along with Pay -slip/form-16 shall be submitted at the tim e of Admission Test. Category (C) Self-Sponsored: Obtained Bachelor s degr ee in Engg./Tech./Arch or M.Sc./MCA as given in the Schedule b elow with at least average Grade point 6.75 (60%) for General Candidate or Grade po int 5.25 (45%) for SC/ST/PW D Candidate. As per Govt. of India rules 3% PW D (Persons wi th disabilities) seat is reserve sup ernum erary. However, candidates who have app ear ed/are du e to app ear at the qualifying exam inations (B.E./B.Tech./B.Arch./B.Pharm./M.Sc../ AM IETE / AM IE Sec. A & B / AIIA), may also apply. If sel ected, candidate m ay be provisionally admitted provided they subm it all passed m ark-sheet up to 7 t h Sem ester(9 t h Sem ester in case of Architecture) of the qualifying exam ination with required percen tage of marks at the tim e of admissi on test. If the final results are awaited on the date of interview such select ed candidates shall have to submit the m ark sheet of the qualifying exam ination within 3 m onths from th e date of comm encem ent of 1 s t sem ester classes failing which or if the candidate is found to be not eligible in term s of percentag e of m arks obtained, his/her provisional admission will be cancelled. Additional eligibility criteria against each course are given below which will supercede the minimum eligibility criteria mentioned above.candidates are inform ed to read carefully the additional eligibility criteria against each course before filling up ONLINE Application Form for th e session 2016-17.
IM PORTANT NOTE: Self -Sponsored candidates are not eligible to apply in the followi ng courses:- 1) M.E. in Civil Engg. 2) M.E. in Com puter Science &Engg. 3) M.E. in Electronics & Tele-communication Engg. 4) M aster in Pharmacy 5) M.E. in Software Engg. I. 4-Sem ester (2-years) Courses (AICTE APPROVED) Offered by the Specialization 1) Architecture Architecture Urban Design Architecture /AIIA Passed certificate 2) Chemical Chem ical -------- Chem ical / Chemical Technology/ Food Tech. & Biochem ical Engg. / Food Technology. Bioprocess ---------- Bio-Technology / Food Technology / Food Tech. & Biochem ical Engg./ Chem ical Engg. 3) Civil Civil a) Structural Engg. b) Soil Mechanics & Foundation Engg c) Environm ental Engg a) Civil Engg. / Construction Engg. b) - do - c) Civil Engg./ Chem ical Engg./ Food Tech. & Bio. Chem. Engg / Construction Engg. / Environm ental Engg. 4) Com puter Sc. & Com puter Science & ---------- Com puter Sc. &Engg. 5) Electrical Engg. Electrical a) Electrical Power System s b) Electrical Machines c) High Voltage Engg. d) Control System a) Electrical Engg. / Power Engg. b) Electrical Engg. / Power Engg. c) Electrical Engg./ Power Engg. / Electronics & Telecomm. Engg. d) Electrical Engg./ Instrum entation & Electronics Engg../ Electronics & Tel ecomm. Engg e) Electrical Measurem ent & Instrum entation. e) - do - Control System Electrical Engg./ Mechanical Engg./ Instrum entation Engg./ Electronics & Telecom. Engg./ Aeronautical Engg. OR their equivalent.
Offered by the Illumination Specialization Electrical/Electronics & Tel ecom /Instrum entation Engg. or equivalent. 6) Electronics & Tele-Comm. Electronics & Tele- Comm. Engg. a. Com puter b. Communication Electronics & Tele-Comm. Engg. (Can apply for all specializations). c. Control d. Microwave e. Electron Devices Instrum entation & Electronics Engg. (Can apply for all specializations exceptmicrowave Engg. And Communication Engg.). 7). Mechanical Engg. Dept Mechanical a) Heat Power Engg. a) Mechanical / Power Engg./ Chem ical / Aerospace (Aeronautical) Engg. b) Machine Design b) Mechanical Engg./ Production Engg./ Aerospace (Aeronautical) Engg./ Applied Mechanics & Aerospac e Engg./ Power Engg./ Autom obile Engg./ Civil Engg./ Metallurgical Engg.. c) Applied Mechanics c) Mechanical./ Civil / Electrical./Chemical / Production Engg. / Aerospace (Aeronautical) Engg. d) Production Engg. d) Mechanical / Production Engg. Autom obile e) Fluid & Hydraulics Engg. e) Mechanical / Power Engg. / Chem ical / Civil / Aerospace (Aeronautical) Engg. Mechanical / Automobile Engg. or Equivalent. 8) Metallurgical & Material Metallurgical Industrial Metallurgy Metallurgical Engg. /Mechanical Engg. / Production Engg. / Ceram ic Tech. or Engg / Chem ical Engg. / Material Engg. Material.. Metallurgical Engg. / Mechanical Engg. / Production Engg. / Ceram ic Tech. or Engg / Chem ical Engg. / Material Engg./ Electrical Engg./ Electronics & Telt.Com. Engg. / Instrum entation. Or M.Sc. in Physics / Chemistry / Material Sc./ Electronics Sc.
Offered by the Specialization Pharm acy Pharm aceutical Chem istry Pharm aceutics Pharm acy Pharm acology 9) Pharm. Tech. Pharm aceutical Biotechnology Pharm acognosy Industrial Pharm acy Clinical Pharmacy & Pharm acy Practice... Pharmacy. 10) Production Engg 11) Information Technology Production Production Technology. Production Managem ent. Production Engg. / Mechanical Engg./ Industrial Engg. & Managem ent / Manufacturing Sc. Software Engg. ------ BE/B.Tech. in any discipline/master of Computer Application (MCA) with GATE in CS&IT and Electronics. 12) Food Tech. & Biochemical Food Technology & Bio-Chem ical ------- Food Tech. & Bio Chemical / Food Technology / Biochem ical / Chem ical 13)Instrum entation & Electronics Engg. Dept Instrum entation & Electronics Engg. ------- Instrum entation & Electronics or equivalent / Electronics & Communication or equivalent / Electrical Engg. or equivalent / Electrical & Electronics Engg. 14) Power Engg. Power Engg. --------- Power Engg / Electrical Engg / Mechanical Engg / Instrum entation Engg. 15) Printing Printing Engg. & Graphic Communication. -------- B.E./ B.Tech in any discipline (Priority m ay be given to B.E. in Printing). II. 6-Sem ester (3-years) Evening Courses (AICTE APPROVED) Offered by the 1) Com puter Sc. & Specialisation Com puter Technology --------- Graduate in any discipline. 2) Electronics Tele- Comm. VSLI Design & Microelectronics Tech. -------- Electronics & Telecomm unication Engg. Engg / Com puter Sc. &Engg. / Instrum entation Engg. Or equivalent. 3) Electronics & Tele-Comm Engg. Intelligent Automation & Robotics. --------- Electronics & Telecomm unication Engg. / Electri cal Engg / Com puter Sc. &Engg. / Instrum entation Engg. Or equivalent.
6). Construction Engg. Construction Structural Repair Retrofit Construction Engg / Civil Engg. or equivalent. Vacant Seat of P.G. Courses in Engg./T ech./arch/pharmacy for the session 2016-17: Sl. No. Course Nam e Category wise Vacant Seat Total Vacancy 1. Architecture 0 0 2. Chem ical Gen.-2, SS 1 3 3. Bioprocess Gen.-3, SC-1, ST-1 5 4. Civil Gen.-3, Spon. - 3 6 5. Com puter Sc. & ST-1, Spon. - 6 7 6. Com puter Technology Gen.- 2, SC 3, ST - 2 7 7. Construction 0 0 8. Electronics & Tel -Communication Engg. Spon. 5 5 9. Intelligent Automation & Robotics Gen. 1 1 10. VLSI Design & Microelectronics Gen.-1 1 11. Control System Gen. 1 1 12. Illumination (Day) Gen.-2, Spon./SS - 1 3 13. Electrical Gen. 2 2 14. Food Technology & Biochemical Engg. Gen. 1 1 15. Instrum entation & Electronics Engg. Gen. 2 2 16. Software Gen.- 5, ST 1, Spon. 3 9 17. Autom obile 0 0 18. Mechanical Gen. 1 1 19. Material SC 1, ST 1 2 20. Metallurgical ST 1 1 21. Clinical Pharmacy SC 1, ST 1 2 22. Pharm acy Gen. 6, ST 1, Spon 4 11 23. Power Gen. 1, SS -1 2 24. Printing Gen.- 5, SC 2, ST 1 8 25. Production 0 0 Total Vacancy : 80
CANDIDATES ARE REQUESTED TO BRING THE FO LLOWING SELF-ATTESTED DOCUM ENTS ALONG WITH THE ORIGI NAL AT THE TIM E OF VERIFICATION OF DOCUM ENTS AT THE TIM E OF COUNSELING AND SPOT ADM ISSION. THE CA NDIDATE WILL NOT BE CONSIDERED WOUTOUT ORIGINAL DOCUM ENTS AND REQUIRED FEES (IF SELECTED) : a) Admit Card and Score Card of GATE/GPAT (if applicable). b) Mark-sheets and Certificates from Secondary exam ination to Undergraduate degr ee exam ination in or to Postgraduate degr ee exam ination in Science courses and Admit Card of Admission Test. c) SC/ST Certificate issued by the Govt. of W est Bengal and Fam ily Incom e Certificate issued by the com petent authority. d) A No Objection Certificate from the em ployer for the entire course p eriod for Sponsored Category candidates. Rel evant exp erienc e c ertificate along with Pay-slip/Form-16 shall be subm itted at the tim e of Admission Test. e) Candidates are requested to subm it the Bachelor course approval letter of AICTE or UGC-AICTE-DEC Joint Committee at the time of Admission Test and at the tim e of Final Admission from the appropriate authority. f) Final year/sem ester appearing certificate issued by the Principal / Controller of Examinations of the University has to be produc ed by the candidate. RELEVENT TUITION FEES PER SEM ESTER FOR P.G. ENGG./TECH./ARCH./PHARM COURSES: P.G. Courses (AICTE approval has subm itted through AICTE Portal by due date for the session 2015-16.) Tuition Fees per Sem ester GATE (Rs.) Tuition Fees per Sem ester Self- Sponsor (Rs.) Tuition Fees per Sem ester Sponsored (Rs.) 1. Arch. 2400/- 2400/- 24,000/- 2. Automobile Engg. 12000/- 12,000/- 30,000/- 3. Bioprocess Engg. 24,000/- 30,000/- 4. Chemical Engg. 2400/- 2400/- 24,000/ 5. Civil Engg. 2400/- 2400/- 24,000/ a. Structural Engg. b. Soil Mechanics & Foundation Engg. c. Environm ental Engg. 6. Clinical Pharm acy & Pharmacy Practice Total course fee is Rs.300000/- Rs.1,50,000/- payable at the tim e of adm ission and rem aining fees have to pay in equal 3 s em ester i.e. Rs.50,000/ - in each sem ester. 7. Com puter Sc. & Engg. 2400/- 2400/- 24,000/ 8. Com puter Tech. (6-Sem ester) -- 22500/- 9. Construction Engg (6-Sem ester) Non-GATE Course -- 24,000/- 30,000/- 10. Control System Engg. 2400/- 2400/- 24,000/ 11. Electrical Engg. 2400/- 2400/- 24,000/ 12. Electronics & Tele. Comm. Engg. 2400/- 2400/- 24,000/ 13. Food Tech. & Bio-Chemical 2400/- 2400/- 24,000/ 14. Illumination Engg. 12000/- 12,000/- 30,000/- 15. Instrum entation & Electronics Engg. 2400/- 2400/- 24,000/
16. Intelligent Automation & Robotics (6- Sem ester) Non-GATE Course 18,000/- 30,000/- 17. Material Engg 2400/- 2400/- 24,000/- 18. Mechanical Engg. 2400/- 2400/- 24,000/ 19. Metallurgical Engg. 2400/- 2400/- 24,000/ 20. Pharmacy 2400/- 2400/- 24,000/ 21. Power Engg. 12000/- 12,000/- 30,000/- 22. Printing Engg. & Graphic Communication 24,000/- 30,000/- 23. Production Engg 2400/- 2400/- 24,000/ 24. Software Engg 18000/- 18,000/- 30,000/- 25. VLSI Design & Micro Electronics.(6-Sem ester) Non GATE Course -- 18,000/- 30,000/- In Addition to the above Fees m entioned, Rs.600/ - as Adm ission Fees is to be paid, (if selected). Im portant to Note: GATE qualified candidates may apply for scholarship through AICTE Portal as and when advertisem ent issued by AICTE. Dr. B. Karm akar, Principal Secretary, F.E.T.