UNIVERSITI TUN HUSSEIN ONN MALAYSIA FAKULTI KEJURUTERAAN AWAM DAN ALAM SEKITAR PERANCANGAN KULIAH LECTURE PLAN MAKLUMAT KURSUS (COURSE INFORMATION) SEMESTER / SESI (SEMESTER / SESSION) : SEMESTER 2 / 2014/2015 KOD KURSUS (COURSE CODE) : BFC 21403 NAMA KURSUS (COURSE NAME) : STRUCTURAL ANALYSIS BEBAN AKADEMIK PELAJAR (COURSE ACADEMIC LOAD) : Aktiviti Pembelajaran (Learning Activity) Kuliah & Pembelajaran Berpusatkan Pelajar (Lecture & Student Centered Learning) Minggu (Week) Jam / Minggu (Hours / Week) Bilangan Jam / Semester (Hours / Semester) 14 3 42 Tutorial (Tutorial) - - - Amali (Practical) - - - Pembelajaran Kendiri dan Penilaian Formal (Independent Study and Formal Assessment) Lain-lain (Others) 1. Projek (Project) 2. Tugasan (Assignment) JUMLAH JAM BELAJAR (JJB) TOTAL STUDENT LEARNING TIME (SLT) - - 51 - - 27 120 Kursus Pra-syarat (Pre requisite Courses) Nama Pensyarah (Lecturer s name) : MECHANICS OF MATERIALS : Nor Hayati Abd. Ghafar (Coordinator) (S5) Dr. Mohd Haziman Wan Ibrahim (S1) Dr. Mohd Hilton b. Ahmad (S2, S3) Dr Norashidah bt Abdul Rahman (S4) Disediakan oleh (Prepared by) : Tandatangan (Signature) : Nama (Name) : NOR HAYATI ABD. GHAFAR Tarikh (Date) : 5 FEBRUARI 2015 Disahkan oleh (Approved by) : Tandatangan (Signature) : Nama (Name) : DR. MOHD HAZIMAN WAN IBRAHIM Tarikh (Date) : 8 FEBRUARI 2015
MATLAMAT (GOALS) : To provide knowledge and understanding regarding the theory and analysis of civil engineering structures. SINOPSIS (SYNOPSIS) : Structural analysis is one of the important aspect need to be studied before designing the structure. This course introduces student to the concept of structural analysis of elastic and inelastic behavior of trusses, beams, columns and frames. Scope of the study includes deformable of statically determinate and indeterminate structure, influence line, plastic analysis and elastic instability HASIL PEMBELAJARAN (LEARNING OUTCOMES) : Upon completion of the course, students will be able to: 1. Analyze the elastic and inelastic behavior of deformable body. 2. Respond to engineering problems based on theory and structural analysis understanding. 3. Perform as a leader in presenting the effective solution for the assigned project. ISI KANDUNGAN (CONTENT) : MINGGU (WEEK) 1 2-3 KANDUNGAN (CONTENT) 1.0 INTRODUCTION TO STRUCTURE (3 HOURS LECTURE) 1.1 Types of structure 1.2 The relation between structural analysis and design 1.3 Idealization of structures 1.4 Stability and determinacy 2.0 DEFORMATION OF STATICALLY DETERMINATE PLANE TRUSS (5 HOURS LECTURE) 2.1 Work and energy principle 2.2 Application for determining deflection of truss 2.3 Virtual work method/unit load PENTAKSIRAN (ASSESSMENT) Quiz 1 Project: Introduction Assignment 1 Project: Introduction Test 1 4-5 3.0 STATICALLY INDETERMINATE PLANE TRUSS (5 HOURS LECTURE) 3.1 Advantages of statically indeterminate structure 3.2 External and internal redundancy 3.3 Solution for truss with one degree of indeterminacy using virtual work method Project: Truss Analysis Test 1
MINGGU (WEEK) 5-7 7 9 KANDUNGAN (CONTENT) 4.0 ANALYSIS OF STATICALLY INDETERMINATE STRUCTURE (7 HOURS LECTURE) 4.1 Slope-deflection method 4.2 Moment distribution method 4.3 Stiffness modification for moment distribution method 4.4 Sway and un-sway stiff frame 5.0 INFLUENCE LINE (7 HOURS LECTURE) 5.1 Muller Breslau theorem 5.2 Influence line for beam shear force and moment 5.3 Applications of influence line 5.4 Maximum shear force 5.5 Absolute maximum moment 5.6 Influence line for truss PENTAKSIRAN (ASSESSMENT) Project: Beam Analysis Test 2 Test 2 Project: Truss Analysis 10-11 12-14 6.0 PLASTIC ANALYSIS (6 HOURS LECTURE) 6.1 Plastic moment 6.2 Load factor and form factor 6.3 Basic plastic theorem 6.4 Assumption in plastic analysis 6.5 Collapse load and collapse mechanism 6.6 Plastic analysis for beam and simple frame using virtual work and graphical method 7.0 ELASTIC INSTABILITY ( 9 HOURS LECTURE) 7.1 Introduction to elastic instability of column and frame 7.2 Types of instability and methods of analysis 7.3 Critical load analysis using stability functions 7.3.1 Stability functions derivation 7.3.2 Application to braced and unbraced column and frame Project: Beam Analysis Quiz 2 Assignment 2 Project: Presentation TUGASAN (ASSIGNMENT ) : Student will be form into a small group to discuss and solve every assignment in tutorial classes. PROJEK(PROJECT) Student will be form into group of five (5) to perform a given project and write a report of the project. The project will be held along the semester. The project description will be distributed on Week 2 and the final report must be hand over at the end of semester, after the group presentation.
PENILAIAN (ASSESSMENT) : 1. Kuiz (Quiz) : 5 % 2. Tugasan (Assignment) : 5 % 3. Projek (Project) : 20 % 3. Ujian (Test) : 20 % 4. Lain-lain (Others) : - % 5. Peperiksaan Akhir : 50 % (ination) Jumlah (Total) : 100 % RUJUKAN (REFERENCES) : 1. Hibbeler, R.C.; Structural Analysis; 6 th Edition ; Prentice Hall; USA; 2006. 2. Kenneth M. Leet, Chia-Ming Uang and Anne M. Gilbert; Fundamentals of Structural Analysis; Mac-Gram Hill; 2008 3. Jack C. McCormac; Structural Analysis: Using Classical and Matrix Methods; Wiley; 4th edition; 2006. 4. Reddy, C.S.; Analysis of Structures; BookSurge Publishing; 2007. 5. A. Ghali, A. M. Neville and T. G. Brown; Structural Analysis : A Unified Classical And Matrix Approach; Spon; 2009 KEHADIRAN / PERATURAN SEMASA KULIAH (LECTURE ATTENDANCE / REGULATION) (1) Pelajar mesti hadir tidak kurang dari 80% masa pertemuan yang ditentukan bagi sesuatu mata pelajaran termasuk mata pelajaran Hadir Wajib (HW) dan mata pelajaran Hadir Sahaja (HS). Students must attend lectures not less than 80% of the contact hours for every subject including Compulsory Attendance Subjects (Hadir Wajib HW) and Attendance Only Subjects (Hadir Sahaja HS). (2) Pelajar yang tidak memenuhi perkara (1) di atas tidak dibenarkan menghadiri kuliah dan menduduki sebarang bentuk penilaian selanjutnya. Markah sifar (0) akan diberikan kepada pelajar yang gagal memenuhi perkara (1). Manakala untuk mata pelajaran Hadir Wajib (HW), pelajar yang gagal memenuhi perkara (1) akan diberi Hadir Gagal (HG). Students who do not fulfill (1) will not be allowed to attend further lectures and sit for any further examination. Zero mark (0) will be given to students who fail to comply with (1). While for Compulsory Attendance Subjects (Hadir Wajib HW), those who fail to comply with (1) will be given Failure Attendance (Hadir Gagal HG). (3) Pelajar perlu mengikut dan patuh kepada peraturan berpakaian yang berkuatkuasa dan menjaga disiplin diri masing-masing untuk mengelakkan dari tindakan tatatertib diambil terhadap pelajar. Students must obey all rules and regulations of the university and must discipline themselves in order to avoid any disciplinary actions against them. (4) Pelajar perlu mematuhi peraturan keselamatan semasa pengajaran dan pembelajaran. Student must obey safety regulations during learning and teaching process
MATRIK HASIL PEMBELAJARAN SUBJEK DAN HASIL PEMBELAJARAN PROGRAM (SUBJECT LEARNING OUTCOMES AND PROGRAMME LEARNING OUTCOMES MATRIX)