NSIC TECHNICAL SERVICES CENTRE, CHENNAI MECHANICAL - SUCCESS STORY 2017

Size: px
Start display at page:

Download "NSIC TECHNICAL SERVICES CENTRE, CHENNAI MECHANICAL - SUCCESS STORY 2017"

Transcription

1 NSIC TECHNICAL SERVICES CENTRE, CHENNAI MECHANICAL - SUCCESS STORY 2017 I K.Partheeban did course in Auto cad at NSIC for a period from to Iam working as the Graduate Engineer at M/s. TVS-SFL Gumudipoondi, and getting a pay of Rs. 10,000/- per month. I thank I, R. Rakesh kumar did course in Auto cad at NSIC for a period from to Iam working as the Graduate Engineer at M/s. Updater Services (P) Limited Chennai and getting a pay of Rs. 10,000/- per month. I thank I,T Balasubramanian did course in Auto cad at NSIC for a period from to Iam working as the Engineer at M/s. Ford, Tuticorin and getting a pay of Rs. 10,000/- per month. I thank NSIC for giving me I, Subramani did course in Auto cad at NSIC for a period from to Iam working as operator at M/s. Able Spring Manufacturers, Chennai and getting a pay of Rs. 10,000/- per month. I thank I, S. Divakar did course in Auto cad at NSIC for a period from to Iam working as HVA Draughtsman at M/s. Reads Engineering LLP, Chennai and getting a pay of Rs. 8,000/- per month. I thank I, I. Vinod kumar did course in Auto cad at NSIC for a period from to I am working as Marketing engineer at M/s. TVS Sundaram Erode and getting a pay of Rs. 10,000/- per month. I thank NSIC for giving me

2 I V. Saravanan did course in Auto cad at NSIC for a period from to I am working as Graduate engineer at M/s. ABI Soorai Green Pvt ltd. and getting a pay of Rs. 11,000/- per month. I thank I E. Arun Kumar did course in Auto cad at NSIC for a period from to I am working as GAT at M/s.ABI Soorai Green Pvt and getting a pay of Rs. 10,800/- per month. I thank NSIC for giving me I D.Rajesh did course in Prototyping Manager(LBI) course at NSIC for a period from to I am working as Executive at M/s. Empower Entreprise and getting a pay of Rs. 10,000/- per month. I thank I S. Dhamodaran did course in Prototyping Manager(LBI) course at NSIC for a period from to I am working as Supervisor at M/s. Sri Balaji Fasteners Tools Ambatur, Chennai and getting a pay of Rs. 9,000/- per month. I thank NSIC for giving me I P. Johnson did course in Prototyping Manager(LBI) course at NSIC for a period from to I am working as Support team at TVS Seruseri, Chennai and getting a pay of Rs lacs per annum. I thank I, T. Siva kumar did course in Prototyping Manager(LBI) at NSIC for a period from to I am working as production engineer at M/s. APT Marine Engg pvt ltd., Cudalore and getting a pay of Rs. 23,000 per month. I thank NSIC for giving me

3 I, M. Deepak did course in 3D Design Modeller at NSIC for a period from to I am working as Executive in M/s. ICICI Bank Chennai and getting a pay of Rs. 11,000 per month. I, A. Ramkumar did course in3d Design Modeller at NSIC for a period from to I am working as Graduate engineer at M/s. Renault Nissan pvt ltd.chennai and getting a pay of Rs. 11,000 per month. I thank I, B. Raj kamal did course in 3D Design Modeller at NSIC for a period from to I am working as Graduate Trainee at M/s. Efab Industries, Chennai and getting a pay of Rs. 11,000 per month. I thank I M. Vignesh kumar did course in 3D Design Modeller at NSIC for a period from to I am working as Consultant at M/s.Sutherland Global Services Limited, Chennai and getting a pay of Rs. 13,000 per month. I thank NSIC for giving me useful training. I B. Koteeswaran did course in 3D Design Modeller at NSIC for a period from to I am working as Quality Engineer at M/s.PMMC, Medavakkam, Chennai and getting a pay of Rs. 10,000 per month. I thank I S.Noorul did course in 3D Design Modeller at NSIC for a period from to I am working as Technician at M/s.Huyndai Chennai and getting a pay of Rs. 10,000 per month. I thank

4 I K. Hariharan did course in 3D Design Modeller at NSIC for a period from to I am working as Design Engineer at M/s. intercept design Solutions Pvt Ltd Kundrathur, Chennai and getting a pay of Rs. 8500/- per month. I thank NSIC for giving me I G. Koteeswaran did course in 3D Design Modeller at NSIC for a period from to I am working as Line Inspector at M/s. Integral Component Manufacturers Pvt. Ltd. Chennai and getting a pay of Rs. 20,000 per month. I thank NSIC for giving me I Ramaa Krishnan did course in 3D Design Modeller at NSIC for a period from to I am working as Graduate Trainee at M/s. Huyndai Motos. Ltd. Chennai and getting a pay of Rs. 11,000 per month. I thank I, M. Mohan did course in 3D Design Modeller at NSIC for a period from to I am working as Graduate Trainee at M/s. igarashi motors india ltd. Chennai and getting a pay of Rs. 15,000 per month. I thank I, S. Mokesh did course in 3D Design Modeller at NSIC for a period from to I am working as Maintenance Engineer at M/s. Ashok Leyland Limited, Ennore Chennai and getting a pay of Rs. 15,000 per month. I thank I, D. Suresh did course in 3D Design Modeller at NSIC for a period from to I am working as Assistant Engineer at M/s. EGS Chennai and getting a pay of Rs. 18,000 per month. I thank NSIC for giving me

5 I, Rajapandian did course in 3D Design Modeller at NSIC for a period from to I am working as Maintenance Engineer at M/s. Metro water, Chennai and getting a pay of Rs. 12,000 per month. I thank I, A. Allvin did course in 3D Design Modeller at NSIC for a period from to I am working as Design Engineer at M/s. Ozone Engineering Solutions, Chennai and getting a pay of Rs. 10,000 per month. I thank I, A. Faizal Ahmed did course in 3D Design Modeller at NSIC for a period from to I am working as Field Engineer at M/s. Flowserve India Controls Pvt Ltd, Chennai and getting a pay of Rs. 12,000 per month. I thank I R. Subbarayan did course in 3D Design Modeller at NSIC for a period from to I am working as Design Engineer at M/s. intercept design Solutions Pvt Ltd Kundrathur, Chennai and getting a pay of Rs. 8500/- per month. I thank NSIC for giving me. I R. Rajeshwaran did course in 3D Design Modeller at NSIC for a period from to I am working as Design Engineer at M/s. trapezoid Ekkaduthangal,Chennai and getting a pay of Rs. 8000/- per month. I thank I M.L Kader Khan did course in 3D Design Modeller at NSIC for a period from to I am working as Design Engineer at M/s. Conquer Cooling Solution Pvt Lt, Bangalore and getting a pay of Rs.18,000/- per month. I thank NSIC for giving me

6 I J. Vigneshwaran did course in 3D Design Modeller at NSIC for a period from to I am working as Supervisor at M/s. TVS, chennai and getting a pay of Rs.12,000/- per month. I thank NSIC for giving me I J. Charles did course in 3D Design Modeller at NSIC for a period from to I am working as Maintenance engineer at M/s. sharda motor India ltd and getting a pay of Rs.11,500/- per month. I thank I, C. Revanth did course in 3D Design Modeller at NSIC for a period from to I am working as Supervisor at M/s JBM Oragadam, chennai and getting a pay of Rs.12,000/- per month. I thank I R. Selva Pandian did course in 3D Design Modeller at NSIC for a period from to I am working as graduate engineer at M/s. IBM India Pvt. Ltd Chennai and getting a pay of Rs.11,500/- per month I thank NSIC for giving me useful training I, M. Sarath Kumar did course in 3D Design Modeller at NSIC for a period from to I am working as Supervisor at M/s JBM Oragadam, chennai and getting a pay of Rs.12,000/- per month. I thank I, D. Vigneshwaran did course in 3D Design Modeller at NSIC for a period from to I am working as Quality Engineer at M/s. Ashwin Industries, chennai and getting a pay of Rs.15,000/- per month. I thank

7 I, K. Udhaya kumar did course in 3D Design Modeller at NSIC for a period from to I am working as Quality Inspector at M/s. Chennai Engineering Works, chennai and getting a pay of Rs.8,000/- per month. I thank NSIC for giving me I, A. Mohamed did course in 3D Design Modeller at NSIC for a period from to I am working in Drafting at M/s. TCS, Chennai and getting a pay of Rs.13,000/- per month. I thank NSIC for giving me I, V. Manikandan, did course in 3D Design Modeller at NSIC for a period from to I am working as Designer at M/s. Interior Design, Chennai and getting a pay of Rs.12,000/- per month. I thank I, Deepak, did course in 3D Design Modeller at NSIC for a period from to I am working as Maintenance engineer at M/s. Shanthi Gears, Coimbatore and getting a pay of Rs.10,000/- per month. I thank I, S. Somu did course in 3D Design Modeller at NSIC for a period from to I am working as Executive at M/s. Tata Telecom Vadapalani Chennai, and getting a pay of Rs.12,500/- per month. I thank I, G. Venkatesh did course in 3D Design Modeller at NSIC for a period from to I am working as Quality Engineer at M/s. Sungwoo Hitech India Pvt. Ltd.Chennai, and getting a pay of Rs.12,000/- per month. I thank

8 I, T. Ramaki did course in 3D Design Modeller at NSIC for a period from to I am working as Draughtsman at M/s. Tata Telecom Vadapalani Chennai, and getting a pay of Rs.9000/- per month. I thank I J. Ganesh kumar did course in 3D Design Modeller at NSIC for a period from to I am working in Graduate engineer at M/s. Renault Nissan,Chennai, and getting a pay of Rs.10500/- per month. I thank I M. Thamizhmaran did course in 3D Design Modeller at NSIC for a period from to I am working in operator at M/s.Gestamp Automotive Chennai Pvt Ltd, and getting a pay of Rs.11000/- per month. I thank NSIC for giving me I S.Subramaniam did course in 3D Design Modeller at NSIC for a period from to I am working as Designer at M/s. Winwall Technology India Private Limited, and getting a pay of Rs.18000/- per month. I thank I D. Elavarasan did course in 3D Design Modeller at NSIC for a period from to I am working as operator at M/s. Winwall Technology India Private Limited, and getting a pay of Rs.18000/- per month. I thank I Rasj Bharath did course in 3D Design Modeller at NSIC for a period from to I am working as supervisor at M/s. X- Team Equipments Private Limited, and getting a pay of Rs.12,000/- per month. I thank

9 I B. Surender did course in Product Design Engineer at NSIC for a period from to I am working as Design Engineer at M/s. Orange Business Services, Chennai and getting a pay of Rs.15,000/- per month. I thank NSIC for giving me I P.Santhanraj did course in Tool Designer at NSIC for a period from to I am working as Quality Engineer at M/s. Nikki India Fuel Systems Pvt Ltd, Chennai and getting a pay of Rs.9,000/- per month. I thank NSIC for giving me I N. Vijayaraja did course in Tool Designer at NSIC for a period from to I am working as Junior Engineer at M/sSuper Auto Forge Pvt Ltd Chennai and getting a pay of Rs.15,000/- per month. I thank I D.Anand did course in Tool Designer at NSIC for a period from to I am working as Quality Engineer at M/s. IGP Engineers Pvt Ltd Chennai and getting a pay of Rs.12,000/- per month. I thank I T. Ganesh kumar did course in Tool Designer at NSIC for a period from to I am working as Quality Control Engineer at M/s. Siyam Industries Hosur and getting a pay of Rs.10,000/- per month. I thank I Esakki Pandian did course in Tool Designer at NSIC for a period from to I am working as Field Officer at M/s. Sankar Construction, Thoothukudi and getting a pay of Rs.15,000/- per month. I thank

10 I S.Vignesh Raja did course in Tool Designer at NSIC for a period from to I am working as Quality Engineer at M/s. Brakes India Chennai and getting a pay of Rs.11,000/- per month. I thank I K. Rajesh did course in Tool Designer at NSIC for a period from to I am working as manager at M/s. Precise 3D Metrology & Design Solutions Pvt Ltd and getting a pay of Rs.30,000/- per month. I thank I S. Karthick did course in Tool Designer at NSIC for a period from to I am working as Design Engineer at M/s. Hinduja Tech Ltd. and getting a pay of Rs.10,000/- per month. I thank I V.S. Sridhar did course in Tool Designer at NSIC for a period from to I am a Entreprenuer running a Hotel business and getting a pay of Rs.20,000/- per month. I G. Buvanesh did course CNC Turning at NSIC for a period from to I am working as Quality Engineer in M/s. Sathya component, Chennai and getting a pay of Rs.9,000/- per month. I thank I V. Karthick did course CNC Turning at NSIC for a period from to I am working as Machine operator in M/s. Trans Energy, Chennai and getting a pay of Rs11,500/- per month. I thank NSIC for giving me

11 I Jagadeeswaran did course in CNC Turning at NSIC for a period to I am a proprietary of M/s. Rosaline Chennai running a own business and getting a pay of Rs.20,000/- per month. I T. Hariprasath did course CNC Turning at NSIC for a period from to I am working as Graduate Engineer in M/s. TVS Fasterners, Chennai and getting a pay of Rs.10000/- per month. I thank I Santhosh S. did course CNC Turning at NSIC for a period from to I am working as Machine operator in M/s. Sathya component, Chennai and getting a pay of Rs.9,500/- per month. I thank I M. Sathish kumar did course CNC Turning at NSIC for a period from to I am working as Operator in M/s. Srimathi Heaters, Chennai and getting a pay of Rs.15,000/- per month. I thank NSIC for giving me I P. Hari Krishnan did course CNC Turning at NSIC for a period from to I am working as Service engineer in M/s. ABT Maruthi, Trichy, and getting a pay of Rs.8,000/- per month. I thank NSIC for giving me I M. Azarudheen did course CNC Turning at NSIC for a period from to I am working as Supervisor in M/s. Climax products, Chennai and getting a pay of Rs.15,000/- per month. I thank

12 I Anto Jone did course CNC Turning at NSIC for a period from to I am working as Marketing Executive in M/s. HDFC, Chennai and getting a pay of Rs.16,000/- per month. I thank NSIC for giving me I M.Abraham Mani did course Tool Designer at NSIC for a period from to I am working as Engineer in M/s. Gaurav Engineering pvt ltd. and getting a pay of Rs.20,000/- per month. I thank I T.Nishanth did course Tool Designer at NSIC for a period from to I am working as Customer Executive( Load Sector) in M/s. Indian Bank and getting a pay of Rs.10,000/- per month. I thank I S.Suresh Kumar did course Tool Designer at NSIC for a period from to I am working as programmer in M/sPremier Cooling systems, Chennai and getting a pay of Rs.14,000/- per month. I thank I S.K.Surender did course Tool Designer at NSIC for a period from to I am working as Quality engineer in M/s. Anu Enterprises Chennai and getting a pay of Rs.12,000/- per month. I thank NSIC for giving me I P.Poovarasan did course Tool Designer at NSIC for a period from to I am working as Design engineer in M/s. Harnic Engineer Chennai and getting a pay of Rs.15,000/- per month. I thank

13 I A.Arun did course Tool Designer at NSIC for a period from to I am working as Development engineer in M/s. GT Electronics Pvt Ltd. and getting a pay of Rs.10,000/- per month. I thank I Vijayan did course Tool Designer at NSIC for a period from to I am working as CMM operator in M/s. K VS Industries Chennai and getting a pay of Rs.8,000/- per month. I thank NSIC for giving me I M.Viknesh did course Tool Designer at NSIC for a period from to I am working as Design Engineer in M/s. R&M Marine Engineering Services India Chennai and getting a pay of Rs.20,000/- per month. I thank NSIC for giving me I Richu starwin did course Tool Designer at NSIC for a period from to I am working as Design Engineer in M/s. Ashok Leyland Chennai and getting a pay of Rs.16,000/- per month. I thank M.Uthaya Raj did course Tool Designer at NSIC for a period from to I am working as Graduate Engineer in M/s. JBM Automation Villipuram and getting a pay of Rs.10,000/- per month. I thank I S. Senthil Kumar did course Tool Designer at NSIC for a period from to I am working as Design Engineer in M/s. ACME India Pvt Ltd, Vandavasi and getting a pay of Rs.12,000/- per month. I thank

14 I S.KArthi Iyappan did course Tool Designer at NSIC for a period from to I am working as Technician in M/s. TVS Perungudi, Chennai and getting a pay of Rs.10,500/- per month. I thank NSIC for giving me I M.Vinoth did course Tool Designer at NSIC for a period from to I am working as Design Engineer in M/s. Pricol Technologies Coimbatore and getting a pay of Rs.10,000/- per month. I thank I R. Bharath Kumar did course Tool Designer at NSIC for a period from to I am working Assembly Line at M/s. ADC Hydraulics, Chennai and getting a pay of Rs.9,000/- per month. I thank I Bala murugan did course CNC- VMC at NSIC for a period from to I am working as VMC operator at M/s. Esco Engineering Pvt Ltd, Pune and getting a pay of Rs.12,000/- per month. I thank NSIC for giving me I K. Manigandan did course CNC-VMC at NSIC for a period from to I am working Machine operator at M/s. Alpha Rubber Pvt Ltd, Chennai and getting a pay of Rs.8,000/- per month. I thank NSIC for giving me I S. Thiyagarajan Ltd did course CNC-VMC at NSIC for a period from to I am working Machine operator at M/s. Toshiba, Manali, Chennai and getting a pay of Rs.15,000/- per month. I thank NSIC for giving me

15 I M. Sakthi Priyan did course CNC-VMC at NSIC for a period from to I am working as Production engineer at M/s. ESKAY Pvt Ltd, Chennai and getting a pay of Rs.25,000/- per month. I thank I S. Mano murali did course CNC-VMC at NSIC for a period from to I am working as Trainee at M/s. Hyundai Plant Chennai and getting a pay of Rs.14,000/- per month. I thank NSIC for giving me I B. Umesh Kannan did course CNC-VMC at NSIC for a period from to I am working as Trainee at M/s. Ford service centre Chennai and getting a pay of Rs.6,500/- per month. I thank NSIC for giving me I S. Ganesh did course CNC-VMC at NSIC for a period from to I am working as Trainee at M/s. Brakes India pvt ltd, Chennai and getting a pay of Rs.9,250/- per month. I thank NSIC for giving me I M. Jeeva did course CNC-VMC at NSIC for a period from to I am working as Operator at M/s. Hi tech Enterprises Chennai and getting a pay of Rs.9,000/- per month. I thank NSIC for giving me I Mohamed Suhail did course CNC-VMC at NSIC for a period from to I am working as Trainee at M/s. Ford India Chennai and getting a pay of Rs.10,800/- per month. I thank NSIC for giving me

16 I G. Dinesh kumar did course CNC-VMC at NSIC for a period from to I am working as Operator at M/s. CPN Tools, Chennai and getting a pay of Rs.8000/- per month. I thank NSIC for giving me I, K. Dhanasekaran did course CNC-VMC at NSIC for a period from to I am working as Supervisor at M/s. Kumaran Engineering pvt ltd, Chennai and getting a pay of Rs.10,000/- per month. I thank I, R. Praveen did course CNC-VMC at NSIC for a period from to I am working as Supervisor at M/s. Kumaran Engineering pvt ltd, Chennai and getting a pay of Rs.10,000/- per month. I thank I, V. Naresh Babu did course CNC-Turning at NSIC for a period from to I am working as Garaudte Trainee at M/s. TVS Motors, Hosur and getting a pay of Rs.9,000/- per month. I thank NSIC for giving me I, M. Ganapathy did course CNC-Turning at NSIC for a period from to I am working as Marketing executive at M/s. Eureka Forbes Chennai and getting a pay of Rs.7,000/- per month. I thank I, M. Akilan did course CNC-Turning at NSIC for a period from to I am working as Marketing executive at M/s. Mentor Infocomm India Pvt Ltd,Chennai and getting a payw of Rs.8,000/- per month. I thank

17 I, R. Praveen did course CNC-Milling at NSIC for a period from to I am working as production supervisor at M/s. Kumaran Engg Pvt Ltd.,Chennai and getting a pay of Rs.13,000/- per month. I thank I, K Dhanasekar did course CNC-Milling at NSIC for a period from to I am working as production supervisor at M/s. Kumaran Engg Pvt Ltd.,Chennai and getting a pay of Rs.13,000/- per month. I thank I, E. Karthikeyan did course CNC-Turning at NSIC for a period from to I am working as CNC Operator at M/s. Pioneer tech Pvt Ltd. Kancheepuram Chennai and getting a pay of Rs.10,000/- per month. I thank NSIC for giving me I, J. Sathish did course CNC-Milling at NSIC for a period from to I am working as CNC Operator at M/s. Pioneer tech Pvt Ltd. Kancheepuram Chennai and getting a pay of Rs.10,000/- per month. I thank NSIC for giving me **************

The Gandhigram Rural Institute Deemed University Gandhigram

The Gandhigram Rural Institute Deemed University Gandhigram The Gandhigram Rural Institute Deemed University Gandhigram 624 302 1. Dean Dayal Upadhyay KAUSHAL Kendra (DDU - KK) The University Grants Commission (UGC) has launched a scheme based on skills development

More information

The specific objectives of Career Guidance and Placement Cell of SIGC Create awareness among students regarding available career options and help

The specific objectives of Career Guidance and Placement Cell of SIGC Create awareness among students regarding available career options and help The specific objectives of Career Guidance and Placement Cell of SIGC Create awareness among students regarding available career options and help them in identifying their career objectives. Guide the

More information

GRG SCHOOL OF MANAGEMENT STUDIES NEWS AND EVENTS FOR THE MONTH OF NOVEMBER 2016

GRG SCHOOL OF MANAGEMENT STUDIES NEWS AND EVENTS FOR THE MONTH OF NOVEMBER 2016 GRG SCHOOL OF MANAGEMENT STUDIES NEWS AND EVENTS FOR THE MONTH OF NOVEMBER 2016 1. Mr. E. Ganesh Thangam, Deputy Manager IT, Roots Industries Limited, Coimbatore, delivered a lecture on the topic Practicing

More information

NATIONAL SYMPOSIUM CUM WORKSHOP ON "RECENT TRENDS IN STRUCTURAL BIOINFORMATICS AND COMPUTER AIDED DRUG DESIGN" (SBCADD-2014) PARTICIPANT LIST

NATIONAL SYMPOSIUM CUM WORKSHOP ON RECENT TRENDS IN STRUCTURAL BIOINFORMATICS AND COMPUTER AIDED DRUG DESIGN (SBCADD-2014) PARTICIPANT LIST 6 th NATIONAL SYMPOSIUM CUM WORKSHOP ON "RECENT TRENDS IN STRUCTURAL BIOINFORMATICS AND COMPUTER AIDED DRUG DESIGN" (SBCADD-2014) PARTICIPANT LIST S.N Name Designation Address / Payment o 1 Mutangana Dieudonne

More information

Bangalore Mysore Pondicherry Tirupati

Bangalore Mysore Pondicherry Tirupati The Royal Cottage, Bangalore Palace, Vasanthanagar, Bangalore- 560 052. Tel: 080 23560387 / 23560389. scalinggreaterheights@gemsbschool.comw ww.gemsbschool.com Bangalore Mysore Pondicherry Tirupati About

More information

Sardar Vallabhbhai National Institute of Technology, Surat (Gujarat) Training & Placement Section. List of Expert Lectures Delivered

Sardar Vallabhbhai National Institute of Technology, Surat (Gujarat) Training & Placement Section. List of Expert Lectures Delivered Sardar Vallabhbhai National Institute of Technology, Training & Placement Section List of Expert Lectures Delivered SR. NO. DATE NAME OF EXPERT TOPIC 1. 18/09/1999 Mr. V. K. Kaul - Director, "How to get

More information

Effect of Cognitive Apprenticeship Instructional Method on Auto-Mechanics Students

Effect of Cognitive Apprenticeship Instructional Method on Auto-Mechanics Students Effect of Cognitive Apprenticeship Instructional Method on Auto-Mechanics Students Abubakar Mohammed Idris Department of Industrial and Technology Education School of Science and Science Education, Federal

More information

DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far

DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far Abstract This paper explains the structure and early development of the government's major initiative to develop CAD/CAM in schools as part

More information

Massachusetts Institute of Technology Tel: Massachusetts Avenue Room 32-D558 MA 02139

Massachusetts Institute of Technology Tel: Massachusetts Avenue  Room 32-D558 MA 02139 Hariharan Narayanan Massachusetts Institute of Technology Tel: 773.428.3115 LIDS har@mit.edu 77 Massachusetts Avenue http://www.mit.edu/~har Room 32-D558 MA 02139 EMPLOYMENT Massachusetts Institute of

More information

Dr. M.MADHUSUDHAN. University of Delhi. Title Dr. First Name Margam Last Name Madhusudhan Photograph. Department of Library and Information Science

Dr. M.MADHUSUDHAN. University of Delhi. Title Dr. First Name Margam Last Name Madhusudhan Photograph. Department of Library and Information Science Dr. M.MADHUSUDHAN Department of Library and Information Science University of Delhi Title Dr. First Name Margam Last Name Madhusudhan Photograph Designation Associate Professor Address Department of Library

More information

Graphic Imaging Technology II - Part two of a two-year program designed to offer students skills in typesetting, art and pasteup,

Graphic Imaging Technology II - Part two of a two-year program designed to offer students skills in typesetting, art and pasteup, Architectural & Engineering Drafting/Design I - Part I of a two-year program where students in grades 11-12 gain knowledge and skills needed to become a draftsperson. Knowledge of Windows based environment

More information

Round Table Discussion on Innovations in Distance Education

Round Table Discussion on Innovations in Distance Education A Report on Round Table Discussion on Innovations in Distance Education Organised by National Centre for Innovations in Distance Education in Collaboration with Microsoft and FITT, IIT Delhi Supervision

More information

Program Review

Program Review De Anza College, Cupertino, CA 1 Description and Mission of the Program A) The Manufacturing and CNC Program (MCNC) offers broad yet in-depth curriculum that imparts a strong foundation for direct employment

More information

Mehul Raithatha. Education Qualifications

Mehul Raithatha. Education Qualifications Mehul Raithatha Associate Professor, Finance and Accounting Area Indian Institute of Management Indore Mobile: +91-9677089379/9867851295 Email: mehulr@iimidr.ac.in/mehular83@gmail.com Education Qualifications

More information

V O L U M E 6 I S S U E 4 O C T O B E R

V O L U M E 6 I S S U E 4 O C T O B E R V O L U M E 6 I S S U E 4 O C T O B E R 2 0 1 4 A y u d h a P o o j a C e l e b r a t i o n s 30 t h S e p t e m b e r, 2 0 1 4 B l o o d D o n a t i o n C a m p 17 t h O c t o b e r, 2 0 1 4 A a r o h

More information

MCA DEPARTMENT. Department of Computer Applications. July May 2016 ISSUE III VOLUME 4

MCA DEPARTMENT. Department of Computer Applications. July May 2016 ISSUE III VOLUME 4 College of Engineering and Technology ( Approved by AICTE, Accredited by National Board of Accreditation, New Delhi) & Affiliated to Anna University, Chennai ) Kothandaraman Nagar, Dindigul - 624 622.

More information

भ रत य व ज ञ न व क ष ए अन स ध न स स थ न वतर पवत

भ रत य व ज ञ न व क ष ए अन स ध न स स थ न वतर पवत ADVT. NO.: 01/2017 (Apply on or before February 15, 2017) Indian Institute of Science Education and Research, Tirupati, is a premier autonomous Institution established by the Ministry of Human Resource

More information

Financial Acumen for Non-Financial Executives November 14-16, 2017

Financial Acumen for Non-Financial Executives November 14-16, 2017 Financial Acumen for Non-Financial Executives November 14-16, 2017 Executive Education Financial Acumen for Non-Financial Executives Developing financial acumen is critical for all managers regardless

More information

Finding a Classroom Volunteer

Finding a Classroom Volunteer Finding a Classroom Volunteer 1 Teacher Looking for Volunteer Support Page My Requirements as a Teacher...1 Classroom Instruction Monitoring Volunteers Flexibility of Visits Volunteer Updates Looking for

More information

Journal title ISSN Full text from

Journal title ISSN Full text from Title listings ejournals Management ejournals Database and Specialist ejournals Collections Emerald Insight Management ejournals Database Journal title ISSN Full text from Accounting, Finance & Economics

More information

INSTITUTE OF MANAGEMENT STUDIES NOIDA

INSTITUTE OF MANAGEMENT STUDIES NOIDA INSTITUTE OF MANAGEMENT STUDIES NOIDA MANDATORY DISCLOSURE- PGDM PROGRAMME The information has been provided by the concerned institution and the onus of authenticity lies with the Institution and not

More information

Director Board. Our vision. Our mission

Director Board. Our vision. Our mission COMPANY PROFILE Director Board CHAIRPERSON MANAGING DIRECTOR EXECUTIVE DIRECTOR - MRS. RAMYA WEERAKOON - MS. MAHIKA WEERAKOON - MR. V.K. THAMEERA ALAKESHWARA Our vision Trendywear (pvt) ltd seeks to achieve

More information

Course offerings in Semester II Version 1 dated UG Programmes

Course offerings in Semester II Version 1 dated UG Programmes Course offerings in 2016-17 Semester II Version 1 dated 5.12.2016 UG Programmes CD AD CNO CName Credits Faculty B.Tech I year II Semester CSE&CSD In MA IMA102 Mathematics II 3-1-0-4 Subhadip Mitra + Lakshmi

More information

Dirty Minds The Business Quiz. IQL Anniversary Quiz 3

Dirty Minds The Business Quiz. IQL Anniversary Quiz 3 Dirty Minds The Business Quiz IQL Anniversary Quiz 3 About the Quiz This quiz contains questions that were used in the recent Business Quiz @ IIT Bombay. The quiz was designed & conceptualized by the Indian

More information

SRI LANKA INSTITUTE OF ADVANCED TECHNOLOGICAL EDUCATION REVISED CURRICULUM HIGHER NATIONAL DIPLOMA IN ENGLISH. September 2010

SRI LANKA INSTITUTE OF ADVANCED TECHNOLOGICAL EDUCATION REVISED CURRICULUM HIGHER NATIONAL DIPLOMA IN ENGLISH. September 2010 SRI LANKA INSTITUTE OF ADVANCED TECHNOLOGICAL EDUCATION REVISED CURRICULUM HIGHER NATIONAL DIPLOMA IN ENGLISH September 2010 Produced by MG Consultants (Pvt) Ltd, 267, Pannipitiya Road, Pelawatte, Battaramulla

More information

Heavy Diesel Service Technician

Heavy Diesel Service Technician Heavy Diesel Service Technician HD31 The heavy diesel service technician certificate provides training in both the theory and diagnosis of basic systems found on diesel engines and heavy equipment. The

More information

School of Natural Sciences

School of Natural Sciences Dear applicant, School of Natural Sciences Offer of Admission to Bachelor of Science (Research) Programs ADMISSIONS OF 2016 Please find below the selection status of candidates for Admission to Shiv Nadar

More information

CURRICULUM VITAE FOR ANNET NSIIMIRE

CURRICULUM VITAE FOR ANNET NSIIMIRE CURRICULUM VITAE FOR ANNET NSIIMIRE CONTACT INFORMATION TELEPHONE: 0414592499 CELL PHONE: 0772408878/0706169601 EMAIL: ansiimire@gmail.com / annet.nsiimire@umeme.co.ug/ ansiimire@utamu.ac.ug BRIEF DESCRIPTION

More information

Reduce the Failure Rate of the Screwing Process with Six Sigma Approach

Reduce the Failure Rate of the Screwing Process with Six Sigma Approach Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 2014 Reduce the Failure Rate of the Screwing Process with Six Sigma Approach

More information

NOMINAL ROLL OF TEACHING STAFF : APS B D BARI. Details Photo Remarks

NOMINAL ROLL OF TEACHING STAFF : APS B D BARI. Details Photo Remarks NOMINAL ROLL OF TEACHING STAFF : APS B D BARI Ser 1. Name Mohammad Asif Khan DOJ 08.07.2004 Qualification M.Sc (Chem), M.Phil., B.Ed. Appt Status PGT (Chem) Date of Appt 09.04.2007 2. Name Mrs Rakhee Jamwal

More information

STRENGTHENING AND EXPANSION OF VOCATIONAL TRAINING IN MADHYA PRADESH. Directorate of Skill Development Madhya Pradesh, Jabalpur

STRENGTHENING AND EXPANSION OF VOCATIONAL TRAINING IN MADHYA PRADESH. Directorate of Skill Development Madhya Pradesh, Jabalpur STRENGTHENING AND EXPANSION OF VOCATIONAL TRAINING IN MADHYA PRADESH Directorate of Skill Development Madhya Pradesh, Jabalpur Vision To facilitate access to employment opportunities in a market economy

More information

A STUDY ON INFORMATION SEEKING BEHAVIOUR OF STUDENTS WITH SPECIAL REFERENCE TO ENGINEERING COLLEGES IN VELLORE DISTRICT G. SARALA

A STUDY ON INFORMATION SEEKING BEHAVIOUR OF STUDENTS WITH SPECIAL REFERENCE TO ENGINEERING COLLEGES IN VELLORE DISTRICT G. SARALA International Journal of Library Science and Research (IJLSR) ISSN (P): 2250-2351; ISSN (E): 2321-0079 Vol. 7, Issue 3, Jun 2017, 33-42 TJPRC Pvt. Ltd. A STUDY ON INFORMATION SEEKING BEHAVIOUR OF STUDENTS

More information

Practical Integrated Learning for Machine Element Design

Practical Integrated Learning for Machine Element Design Practical Integrated Learning for Machine Element Design Manop Tantrabandit * Abstract----There are many possible methods to implement the practical-approach-based integrated learning, in which all participants,

More information

Course Syllabus MFG Modern Manufacturing Techniques I Spring 2017

Course Syllabus MFG Modern Manufacturing Techniques I Spring 2017 Faculty: Mr. Stephen Jenkins Telephone: 443-523-6257 Course Syllabus MFG 111 01 Modern Manufacturing Techniques I Spring 2017 410-677-5144 Email: Office Hours: By Appointment Class Time Lecture: Tuesday

More information

Computers on Wheels!!

Computers on Wheels!! Computers on Wheels!! Computer Education Through Mobile Computer Vans for Rural Children. The Project: Vidya Pratishthan s Institute of Information Technology (VIIT), Baramati, Dist. Pune, Maharashtra,

More information

What is Effect of k-12 in the Electrical Engineering Practice?

What is Effect of k-12 in the Electrical Engineering Practice? What is Effect of k-12 in the Electrical Engineering Practice? REPUBLIC ACT NO 7920 THE NEW ELECTRICAL ENGINEERING LAW Definition of Terms Practice of electrical engineering a person is deemed to be in

More information

Faculty of Engineering

Faculty of Engineering Jordan University of Science and Technology Faculty of Engineering Department of Industrial Engineering Undergraduate Curriculum for the B.Sc. Degree in Industrial Engineering Date: 16/08/2007 Vision To

More information

June 15, 1962 in Shillong, Meghalaya, India. Address: Civil Dept, Assam Engineering College, Guwahati

June 15, 1962 in Shillong, Meghalaya, India. Address: Civil Dept, Assam Engineering College, Guwahati Curriculum vitae BINU SHARMA Personal data Name: Binu Sharma Born: June 15, 1962 in Shillong, Meghalaya, India Nationality: Indian Address: Civil Dept, Assam Engineering College, Guwahati 781013 Professional

More information

Important Questions For Physics For Maharashtra Board

Important Questions For Physics For Maharashtra Board Important Questions For Physics For Board Free PDF ebook Download: Important Questions For Physics For Download or Read Online ebook important questions for physics for maharashtra board in PDF Format

More information

MFDS Part 1 - Monday 2 nd October 2017 Programme for Candidates

MFDS Part 1 - Monday 2 nd October 2017 Programme for Candidates MFDS Part 1 - Monday 2 nd October 2017 Programme for Candidates UK Centres Cardiff, UK Glasgow, UK London, UK Preston, UK Overseas Centres Bangalore, India Chennai, India Dubai, UAE Hong Kong New Delhi

More information

SESSIONAL WORK (Physics) Sr.no. Name Topic 1 Hemant Planning An Out Of Class Activity To Use Local Resources To Teach Physics. 2 Raj Kumar Preparation

SESSIONAL WORK (Physics) Sr.no. Name Topic 1 Hemant Planning An Out Of Class Activity To Use Local Resources To Teach Physics. 2 Raj Kumar Preparation SESSIONAL WORK (Mathematics) Sr.no. Name Topic 1 Divya Preparation Of An Article Related To Any Mathematical Topic. Student Should Select Those Types Of Topic Which May Be Useful For Creating Mathematical

More information

===COURSE j =1 1 I I 1=

===COURSE j =1 1 I I 1= MADURA I KAMARAJ ; (DIRECTORATE UNIVERSITY OF DISTANCE EDUCATION) B.L.I.Se. / M.L.I.Se. / BGL (Non-Semester) DEGREE EXAMINATION APRIL / NOV. - Name of the Course Signature of the Candidate at the top of

More information

Visit Valley Works at or Mass JobQuest at Job Listings for Greater Lawrence as of:

Visit Valley Works at  or Mass JobQuest at  Job Listings for Greater Lawrence as of: Visit Valley Works at www.valleyworks.cc or Mass JobQuest at www.detma.org Job Listings for Greater Lawrence as of: 2ND SHIFT GENERAL CLERK $13/Hour New Hampshire Full-Time HiSET/GED 1 8535657 ACADEMIC

More information

AC : AUTOMATED ONLINE PROCESS TRAINING IN A VIR- TUAL ENVIRONMENT

AC : AUTOMATED ONLINE PROCESS TRAINING IN A VIR- TUAL ENVIRONMENT AC 2012-4993: AUTOMATED ONLINE PROCESS TRAINING IN A VIR- TUAL ENVIRONMENT Mr. Hatem M. Wasfy, Advanced Science and Automation Corp. Mr. Hatem Wasfy is the President of Advanced Science and Automation

More information

Developing a Distance Learning Curriculum for Marine Engineering Education

Developing a Distance Learning Curriculum for Marine Engineering Education Paper ID #17453 Developing a Distance Learning Curriculum for Marine Engineering Education Dr. Jennifer Grimsley Michaeli P.E., Old Dominion University Dr. Jennifer G. Michaeli, PE is the Director of the

More information

Information Communication Technology (ICT) Infrastructure Facilities in Self-Financing Engineering College Libraries in Tamil Nadu

Information Communication Technology (ICT) Infrastructure Facilities in Self-Financing Engineering College Libraries in Tamil Nadu University of Nebraska - Lincoln DigitalCommons@University of Nebraska - Lincoln Library Philosophy and Practice (e-journal) Libraries at University of Nebraska-Lincoln 3-2011 Information Communication

More information

Infrared Paper Dryer Control Scheme

Infrared Paper Dryer Control Scheme Infrared Paper Dryer Control Scheme INITIAL PROJECT SUMMARY 10/03/2005 DISTRIBUTED MEGAWATTS Carl Lee Blake Peck Rob Schaerer Jay Hudkins 1. Project Overview 1.1 Stake Holders Potlatch Corporation, Idaho

More information

Introduction and Theory of Automotive Technology (AUMT 1301)

Introduction and Theory of Automotive Technology (AUMT 1301) Introduction and Theory of Automotive Technology (AUMT 1301) Credit: 3 semester credit hours (3 hours lecture) Prerequisite/Co-requisite: None Course Description An introduction to the automobile industry

More information

Service and Repair Pneumatic Systems and Components for Land-based Equipment

Service and Repair Pneumatic Systems and Components for Land-based Equipment Unit 13: Service and Repair Pneumatic Systems and Components for Land-based Equipment Unit code: K/600/3441 QCF Level 3: BTEC National Credit value: 5 Guided learning hours: 30 Aim and purpose The aim

More information

GOVERNMENT ENGINEERING COLLEGE, JHALAWAR (An Autonomous Institute of Govt. of Rajasthan) RECRUITMENT OF NON-TEACHING POSITIONS

GOVERNMENT ENGINEERING COLLEGE, JHALAWAR (An Autonomous Institute of Govt. of Rajasthan) RECRUITMENT OF NON-TEACHING POSITIONS S. No. GOVERNMENT ENGINEERING COLLEGE, JHALAWAR (An Autonomous Institute of Govt. of Rajasthan) RECRUITMENT OF NON-TEACHING POSITIONS Name of Post Pay Scale, AGP No. of Posts as per Roster SC ST OBC UR

More information

week prep Potchefstroom College GCC

week prep Potchefstroom College GCC week prep Potchefstroom College GCC PROSPECTUS WELCOME At Potchefstroom College GCC we offer a variety of courses to help engineers successfully complete their Government Certificate of Competency, otherwise

More information

ABHINAV NATIONAL MONTHLY REFEREED JOURNAL OF RESEARCH IN COMMERCE & MANAGEMENT

ABHINAV NATIONAL MONTHLY REFEREED JOURNAL OF RESEARCH IN COMMERCE & MANAGEMENT INDUSTRIAL REQUIREMENT AND COMMERCE EDUCATION IN GLOBALIZATION Dhaval Desai Ph. D. Scholar, Pacific University, Udaipur, India Email: dhaval_mdt@yahoo.in ABSTRACT The growing phenomenon of globalization,

More information

Bachelor of Engineering

Bachelor of Engineering Bachelor of Engineering Technology KEY INFORMATION FOR STUDENTS Bachelor of Engineering Technology ENTRY REQUIREMENTS Location Duration Delivery Credits Level Start Dunedin Three years full-time; part-time

More information

National Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members

National Institute of Technology, Tiruchirappalli: Performa for CV of Faculty/ Staff Members Curriculum Vitae Brief Profile: (not exceeding 500 words) Dr. S. Mekala is an Assistant Professor of English in the Department of Humanities at National Institute of Technology, Tiruchirapalli. She earned

More information

SELECCIÓN DE CURSOS CAMPUS CIUDAD DE MÉXICO. Instructions for Course Selection

SELECCIÓN DE CURSOS CAMPUS CIUDAD DE MÉXICO. Instructions for Course Selection Instructions for Course Selection INSTRUCTIONS FOR COURSE SELECTION 1. Open the following link: https://prd28pi01.itesm.mx/recepcion/studyinmexico?ln=en 2. Click on the buttom: continue 3. Choose your

More information

WORKFORCE DEVELOPMENT: WHAT WORKS? WHO BENEFITS? Harry J. Holzer Georgetown University The Urban Institute February 2010

WORKFORCE DEVELOPMENT: WHAT WORKS? WHO BENEFITS? Harry J. Holzer Georgetown University The Urban Institute February 2010 WORKFORCE DEVELOPMENT: WHAT WORKS? WHO BENEFITS? Harry J. Holzer Georgetown University The Urban Institute February 2010 1 Outline Labor Market: Demand v. Supply of Skills; Middle- v. High-Skill Jobs Effective

More information

Instrumentation, Control & Automation Staffing. Maintenance Benchmarking Study

Instrumentation, Control & Automation Staffing. Maintenance Benchmarking Study Electronic Document Instrumentation, Control & Automation Staffing Prepared by ITA Technical Committee, Maintenance Subcommittee, Task Force on IC&A Staffing John Petito, Chair Richard Haugh, Vice-Chair

More information

AC : TEACHING DYNAMICS WITH A DESIGN PROJECTS

AC : TEACHING DYNAMICS WITH A DESIGN PROJECTS AC 2011-615: TEACHING DYNAMICS WITH A DESIGN PROJECTS David R. Mikesell, Ohio Northern University David R. Mikesell is an assistant professor of mechanical engineering at Ohio Northern University. His

More information

Centres of Vocational Excellence Case Studies

Centres of Vocational Excellence Case Studies Centres of Vocational Excellence Case Studies Since the concept of Centres of Vocational Excellence (CoVE) was launched in November 2000 by the then Secretary of State for Education and Employment at the

More information

Tribal Colleges and Universities

Tribal Colleges and Universities Tribal Colleges and Universities Investments in TRIBAL Higher Education Strengthen Culture, Community, and Citizens 2016 NCAI Mid-year Conference Spokane, WA June 29, 2016 Self Determination: Strengthening

More information

FEEDBACK. British International Doctors Association (BIDA) Annual Conference

FEEDBACK. British International Doctors Association (BIDA) Annual Conference DOCTORS ACADEMY Disseminating Medical Knowledge and Skills Globally British International Doctors Association 19th October (Saturday) 13 Education Centre, The Christie Hospital, Manchester British International

More information

An Analysis of the El Reno Area Labor Force

An Analysis of the El Reno Area Labor Force An Analysis of the El Reno Area Labor Force Summary Report for the El Reno Industrial Development Corporation and Oklahoma Department of Commerce David A. Penn and Robert C. Dauffenbach Center for Economic

More information

University of Phoenix - Office of Student Services and Admissions - Course Transfer Guide. Minnesota West Community and Technical College

University of Phoenix - Office of Student Services and Admissions - Course Transfer Guide. Minnesota West Community and Technical College University of Phoenix - Office of Student Services and Admissions - Course Transfer Guide Minnesota West Community and Technical College 2008-2010 College Catalog Transfer Guide The following is a list

More information

K.L.N. COLLEGE OF ENGINEERING, POTTAPALAYAM. Department of Computer Science and Engineering. Academic Year:

K.L.N. COLLEGE OF ENGINEERING, POTTAPALAYAM. Department of Computer Science and Engineering. Academic Year: K.L.N. COLLEGE OF ENGINEERING, POTTAPALAYAM Department of Computer Science and Details of Faculty Development/ Training / Seminar / Workshop attended by Faculty members Academic Year: 2014-2015 S.No. Name

More information

Thiagarajar College (Autonomous), Madurai 9 (Re-Accredited with A Grade by NAAC)

Thiagarajar College (Autonomous), Madurai 9 (Re-Accredited with A Grade by NAAC) Thiagarajar College (Autonomous), Madurai 9 (Re-Accredited with A Grade by NAAC) R.Raja Govindasamy Principal 17.12.2009 To Thiru. B.S.Ponmudiraj, Assistant Adviser, National Assessment and Accreditation

More information

AC : ENGINEERING EDUCATION EXCELLENCE: START-UP TO NUMBER ONE

AC : ENGINEERING EDUCATION EXCELLENCE: START-UP TO NUMBER ONE AC 2008-432: ENGINEERING EDUCATION EXCELLENCE: START-UP TO NUMBER ONE Robert Creese, West Virginia University Robert C. Creese is Professor of Industrial Engineering in the Industrial and Management Systems

More information

STUDY IN INDIA AND SWEDEN, EUROPE

STUDY IN INDIA AND SWEDEN, EUROPE Uni DOUBLE DEGREE MASTER S PROGRAM Andhra University, India * Memorandum of Cooperation * Blekinge Institute of Technology, Sweden Blekinge Institute of Technology (BTH) is the most profiled modern university

More information

Higher Education in India Opportunities and Challenges for Foreign Universities

Higher Education in India Opportunities and Challenges for Foreign Universities Higher Education in India Opportunities and Challenges for Foreign Universities Presented by Dr. Navin Mukesh Punjabi Assistant Professor H R College of Commerce & Economics BMS, M Com, PGDBA, UGC NET

More information

ME 443/643 Design Techniques in Mechanical Engineering. Lecture 1: Introduction

ME 443/643 Design Techniques in Mechanical Engineering. Lecture 1: Introduction ME 443/643 Design Techniques in Mechanical Engineering Lecture 1: Introduction Instructor: Dr. Jagadeep Thota Instructor Introduction Born in Bangalore, India. B.S. in ME @ Bangalore University, India.

More information

Open Distance Learning - Environmental Management Course

Open Distance Learning - Environmental Management Course Open Distance Learning - Environmental Management Course Dr. Ramachandra T.V. Energy & Wetlands Research Group, Centre for Ecological Sciences, CES TE 15 New Bioscience Building [Near D Gate] Indian Institute

More information

WORKSHOP. technologies

WORKSHOP. technologies RISE Research Industrial Systems Engineering presents WORKSHOP on mobile Android Development technologies An RISE event hosted by sanskrithi group of institutions 04 th I 02 I 2017 01 Abstract 660 million

More information

PRINCE2 Practitioner Certification Exam Training - Brochure

PRINCE2 Practitioner Certification Exam Training - Brochure PRINCE2 Practitioner Certification Exam Training - Brochure The Credential that makes you a Project Management Specialist Course Name : PRINCE2_P Version : INVL_PRINCE2P_BR_02_035_1.2 Course ID : PMGT

More information

Queen's Clinical Investigator Program: In- Training Evaluation Form

Queen's Clinical Investigator Program: In- Training Evaluation Form Queen's Clinical Investigator Program: In- Training Evaluation Form Name of trainee: Date of meeting: Thesis/Project title: Can the project be completed within the recommended timelines 2 years MSc - 4/5

More information

Making welding simulators effective

Making welding simulators effective Making welding simulators effective Introduction Simulation based training had its inception back in the 1920s. The aviation field adopted this innovation in education when confronted with an increased

More information

UNIVERSITY OF DELHI DEPARTMENT OF ADULT CONTINUTING EDUCATION & EXTENSION. UNDERGRADUATE PROGRAMME (Courses effective from Academic Year )

UNIVERSITY OF DELHI DEPARTMENT OF ADULT CONTINUTING EDUCATION & EXTENSION. UNDERGRADUATE PROGRAMME (Courses effective from Academic Year ) Choice Based Credit System (CBCS) UNIVERSITY OF DELHI DEPARTMENT OF ADULT CONTINUTING EDUCATION & EXTENSION UNDERGRADUATE PROGRAMME (Courses effective from Academic Year 2015-16) SYLLABUS OF COURSES TO

More information

HCFC Phase-Out Management Plan Servicing Sector

HCFC Phase-Out Management Plan Servicing Sector Implemented by HCFC Phase-Out Management Plan Servicing Sector Roundtable Meeting 5 th March 2014 Seite 1 Implemented by HCFC Phase-Out Management Plan Servicing Sector Roundtable Meeting 5 th March 2014

More information

IN THE HIGH COURT OF KARNATAKA, BENGALURU BEFORE THE HON'BLE MR.JUSTICE RAM MOHAN REDDY

IN THE HIGH COURT OF KARNATAKA, BENGALURU BEFORE THE HON'BLE MR.JUSTICE RAM MOHAN REDDY 1 IN THE HIGH COURT OF KARNATAKA, BENGALURU DATED THIS THE 8 TH DAY OF JANUARY, 2015 BEFORE THE HON'BLE MR.JUSTICE RAM MOHAN REDDY WRIT PETITION NO.39217/2012 (GM-CPC) BETWEEN SRI ANSAR PASHA S/O LATE

More information

San Francisco County Weekly Wages

San Francisco County Weekly Wages San Francisco County Weekly Wages Focus on Post-Recession Recovery Q 3 205 Update Produced by: Marin Economic Consulting March 6, 206 Jon Haveman, Principal 45-336-5705 or Jon@MarinEconomicConsulting.com

More information

Kendriya Vidyalaya Sangathan

Kendriya Vidyalaya Sangathan Kendriya Vidyalaya Sangathan Intel* Teach Program MEMORANDUM OF UNDERSTANDING This Memorandum of Understanding ("MoU") is made on ^...20. Technology... c"7 between Intel India Private Limited, a company

More information

Knowing the Unknown! One Day Orientation Program for School Students of Parikrma Humanity Foundation, Bangalore

Knowing the Unknown! One Day Orientation Program for School Students of Parikrma Humanity Foundation, Bangalore Knowing the Unknown! One Day Orientation Program for School Students of Parikrma Humanity Foundation, Bangalore Organized by TransDisciplinary University, Bangalore (TDU) 74/2, Jarakbande Kaval, Via Yelahanka,

More information

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS C2ER / LMI INSTITUTE IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS JUNE 09 2016 US DEPARTMENT OF LABOR MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM Introductions

More information

Georgia Tech College of Management Project Management Leadership Program Eight Day Certificate Program: October 8-11 and November 12-15, 2007

Georgia Tech College of Management Project Management Leadership Program Eight Day Certificate Program: October 8-11 and November 12-15, 2007 Proven Methods for Project Planning, Scheduling and Control Managing Project Risk Project Managers as Agents of Change and Innovation Georgia Tech College of Management Project Management Leadership Program

More information

(Effective from )

(Effective from ) PADHO PARDESH - SCHEME OF INTEREST SUBSIDY ON EDUCATIONAL LOANS FOR OVERSEAS STUDIES FOR THE STUDENTS BELONGING TO THE MINORITY COMMUNITIES (Effective from 2013-14) GOVERNMENT OF INDIA MINISTRY OF MINORITY

More information

Indian Institute of Ayurvedic Pharmaceutical Sciences [ISO (9001:2008) Certified College]

Indian Institute of Ayurvedic Pharmaceutical Sciences [ISO (9001:2008) Certified College] Indian Institute of Ayurvedic Pharmaceutical Sciences [ISO (9001:2008) Certified College] Gujarat Ayurved University [NAAC Accreditation Grade A with CGPA 3.28] Frequently Asked Questions (FAQs) 1. How

More information

IMPROVE THE QUALITY OF WELDING

IMPROVE THE QUALITY OF WELDING Virtual Welding Simulator PATENT PENDING Application No. 1020/CHE/2013 AT FIRST GLANCE The Virtual Welding Simulator is an advanced technology based training and performance evaluation simulator. It simulates

More information

C.ABDUL HAKEEM COLLEGE OF ENGINEERING & TECHNOLOGY (ISO 9001 : 2008 & NBA

C.ABDUL HAKEEM COLLEGE OF ENGINEERING & TECHNOLOGY (ISO 9001 : 2008 & NBA C.ABDUL HAKEEM COLLEGE OF ENGINEERING & TECHNOLOGY (ISO 9001 : 2008 Certified & NBA Accredited ) (Approved by AICTE, New Delhi & Affiliated to Anna, Chennai.) MANDATORY DISCLOSURE Hakeem Nagar, Melvisharam

More information

Geothermal Training in Oradea, Romania

Geothermal Training in Oradea, Romania Geothermal Training in Oradea, Romania Marcel ROŞCA and Cornel ANTAL University of Oradea Abstract The paper presents the International Geothermal Training Centre at the University of Oradea, Romania,

More information

GLOBAL MEET FOR A RESURGENT BIHAR

GLOBAL MEET FOR A RESURGENT BIHAR GLOBAL MEET FOR A RESURGENT BIHAR 19-21 January, 2007, Patna Venue: Hotel Maurya, Patna Organised by Institute for Human Development and The Bihar Times In collaboration with Government of Bihar Organising

More information

Auto Tech Employer Survey

Auto Tech Employer Survey What type of business are you? Fleet Service Dealership Independent Transmission Shop Tire Show Other (please specify) 20.0% 2 80.0% 8 5 10 5 What type of business are you? Fleet Service Dealership Independent

More information

ARCHITECTURAL EDUCATION AND THE CURRENT PROFESSIONAL SCENARIO

ARCHITECTURAL EDUCATION AND THE CURRENT PROFESSIONAL SCENARIO ARCHITECTURAL EDUCATION AND THE CURRENT PROFESSIONAL SCENARIO AUTHOR: Dr. J. Jinu Louishidha Kitchley, Department of Architecture, Thiagarajar College of Engineering, jinujoshua@tce.edu. ABSTRACT Architectural

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS APPLIED MECHANICS MET 2025

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS APPLIED MECHANICS MET 2025 PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS APPLIED MECHANICS MET 2025 Class Hours: 3.0 Credit Hours: 4.0 Laboratory Hours: 3.0 Revised: Fall 06 Catalog Course Description: A study of

More information

MOODLE 2.0 GLOSSARY TUTORIALS

MOODLE 2.0 GLOSSARY TUTORIALS BEGINNING TUTORIALS SECTION 1 TUTORIAL OVERVIEW MOODLE 2.0 GLOSSARY TUTORIALS The glossary activity module enables participants to create and maintain a list of definitions, like a dictionary, or to collect

More information

Social Justice Practicum (SJP) Description

Social Justice Practicum (SJP) Description Social Justice Practicum (SJP) Description The Social Justice Practicum (SJP) is a first-year, non-clinical and non-discipline specific experiential practicum that occurs during the Fall and Spring Terms.

More information

STATUS OF OPAC AND WEB OPAC IN LAW UNIVERSITY LIBRARIES IN SOUTH INDIA

STATUS OF OPAC AND WEB OPAC IN LAW UNIVERSITY LIBRARIES IN SOUTH INDIA CHAPTER - 5 STATUS OF OPAC AND WEB OPAC IN LAW UNIVERSITY LIBRARIES IN SOUTH INDIA 5.0. Introduction Library automation implies the application of computers and utilization of computer based products and

More information

PROF. DR.-ING. JAMEEL AHMAD KHAN

PROF. DR.-ING. JAMEEL AHMAD KHAN Curriculum Vitae PROF. DR.-ING. JAMEEL AHMAD KHAN Date of Birth February 01, 1938 Place of Birth Aligarh, UP, British India Nationality Pakistani Father s Name Abdul Hameed Khan Address E-6/1, Block-7,

More information

STUDENT SATISFACTION IN PROFESSIONAL EDUCATION IN GWALIOR

STUDENT SATISFACTION IN PROFESSIONAL EDUCATION IN GWALIOR International Journal of Human Resource Management and Research (IJHRMR) ISSN 2249-6874 Vol. 3, Issue 2, Jun 2013, 71-76 TJPRC Pvt. Ltd. STUDENT SATISFACTION IN PROFESSIONAL EDUCATION IN GWALIOR DIVYA

More information

Table of Contents ADMINISTRATOR S MESSAGE WHO S WHO AT OKM School Contact... 2 HOW TO PLAN YOUR COURSES FOR NEXT YEAR... 3

Table of Contents ADMINISTRATOR S MESSAGE WHO S WHO AT OKM School Contact... 2 HOW TO PLAN YOUR COURSES FOR NEXT YEAR... 3 Table of Contents ADMINISTRATOR S MESSAGE... 2 WHO S WHO AT OKM School Contact... 2 HOW TO PLAN YOUR COURSES FOR NEXT YEAR... 3 COURSE DESCRIPTIONS: Academic Support... 4 Applied Skills / Technology Education...

More information

HARLOW COLLEGE FURTHER EDUCATION CORPORATION RESOURCES COMMITTEE. Minutes of the meeting held on Thursday 12 May 2016

HARLOW COLLEGE FURTHER EDUCATION CORPORATION RESOURCES COMMITTEE. Minutes of the meeting held on Thursday 12 May 2016 HARLOW COLLEGE FURTHER EDUCATION CORPORATION RESOURCES COMMITTEE Minutes of the meeting held on Thursday 12 May 2016 Membership: * Denotes Present In attendance: *E Johnson (Chair) *J Bedford *J Breen

More information

SRI RAMACHANDRA UNIVERSITY (Declared under Section 3 of the UGC Act, 1956)

SRI RAMACHANDRA UNIVERSITY (Declared under Section 3 of the UGC Act, 1956) GROUP - A Regn. No. :... (To be filled by Office) Stream in +2 Biology Stream Non-Biology Stream Put a ( ) mark SRI RAMACHANDRA UNIVERSITY Porur, Chennai - 600 116 Affix your latest passport size photograph

More information

Execution Plan for Software Engineering Education in Taiwan

Execution Plan for Software Engineering Education in Taiwan 2012 19th Asia-Pacific Software Engineering Conference Execution Plan for Software Engineering Education in Taiwan Jonathan Lee 1, Alan Liu 2, Yu Chin Cheng 3, Shang-Pin Ma 4, and Shin-Jie Lee 1 1 Department

More information