Chapter 8 Process Management: Lean Production and Six Sigma Quality Issues in Supply Chain Management

Size: px
Start display at page:

Download "Chapter 8 Process Management: Lean Production and Six Sigma Quality Issues in Supply Chain Management"

Transcription

1 Chapter 8 Process Management: Lean Production and Six Sigma Quality Issues in Supply Chain Management TRUE/FALSE 1. Lean production is an operating philosophy or mindset that essentially attempts to minimize the impact of system variability and flaws in forecasting through the use of high safety stock inventories. 2. Lean production and Six Sigma quality are essentially two terms that mean the same thing. 3. Channel integration is a supply chain term which refers to how a manufacturing firm within a supply chain attempts to create strategic alliances not only with their immediate suppliers but also with the suppliers' suppliers and in the other direction not only reaching out to its immediate customers but also the customer's customers. 4. Manufacturing layouts for an organization practicing lean manufacturing principles seek to maximize operator visibility, maintain an effective and efficient flow of people and materials, and minimize the distance that work in process must travel from one processing center to another processing center. 5. Organizations practicing lean production often increase their inventory levels in the long-run in order to create a cushion against variability so that they can investigate and eliminate the weaknesses of their system. 6. The objective of the Deming Prize is to stimulate quality and productivity improvement among US firms. 7. W. Edwards Deming and Shigeo Shingo were two of the notables who helped Toyota develop the Toyota Production System. 8. When designing a manufacturing or service process, or even during the reengineering of such a process, a Pareto chart would be an essential tool for evaluating the process in terms of its action elements, waiting periods, and process flow. 9. Statistical process control uses control charts to monitor the outputs of a process to identify variations due to assignable causes from variations due to common causes.

2 10. The five S's refer to various safety activities practiced by Toyota. 11. The primary design objective with lean layouts is to reduce wasted movements of workers, customers, and/or work-in-process 12. Carbon neutral organizations do not produce any carbon emissions. 13. Six Sigma is a quality improvement concept developed by Motorola. 14. Deming's 14 points actually conflict with many Six Sigma concepts. 15. For a certain loaf of bread it was found that it measured 16 inches in length, 4 inches in height, and 4 inches across, it was also found to weigh 1 pound; all of these measures can be considered attribute data. 16. Acceptance sampling is a statistical technique that enables a reject or accept decision to be made based on information obtained from a representative sample drawn from the population. MULTIPLE CHOICE 1. Modern supply chains simultaneously pursue the goals of high-quality, fast response, and low cost because customers nowadays want both high levels of quality and responsiveness. A key manufacturing philosophy that emphasizes waste elimination and minimizing inventories to expose problems is: a. Just-in-time b. Quick Response c. Efficient Consumer Response d. Total Quality Management ANS: A 2. Japanese manufacturing firms sometimes create cooperative coalitions with their suppliers in order to provide the suppliers with a certain degree of financial support. What are these cooperative coalitions called? a. Jidoka Networks b. Keiretsu Networks c. Kanban Networks

3 d. Kaizen Networks 3. Which of the following are among the most important elements of the lean production philosophy? a. Quality inspections and a standardized product line b. Fully automated assembly lines and a large supplier base c. Large inventories and quality inspections d. Waste reduction and value enhancement ANS: D 4. Which company probably played the largest role in the development of the Toyota Production System? a. General Motors b. Ford c. Chrysler d. Boeing 5. Lean production systems are sometimes referred to as pull systems because demand from customers activates the production actions of the manufacturing facilities. In order for this demand to be communicated to everyone in the supply chain/manufacturing facility a signal must be passed from downstream processing centers to the upstream processing centers. This system of relaying signals is referred to as a: a. Kanban Pull System b. Semaphore System c. Keiretsu Network d. TQM Network ANS: A 6. Which of the following is NOT consistent with the lean philosophy? a. Cross-training employees to increase processing flexibility b. Developing a culture of continuous improvement within the organization c. Increasing batch size to take advantage of economies of scale d. Positioning WIP inventories near each processing center ANS: C 7. Which of the following is NOT one of Toyota's seven wastes? a. Excess inventories b. Environmental waste c. Waiting time d. Scrap and rework 8. Which of the following best describes the five S's? a. These were originally Japanese words relating to industrial housekeeping b. Five ways to reduce inventories on the shop floor c. These are five different kinds of manufacturing layouts d. Refer to methods for reducing setup times ANS: A

4 9. While the philosophy of Six Sigma means different things to different people and is practiced differently in different companies, according to the textbook, two of the more important and agreedupon elements of Six Sigma are: a. Minimizing inventories and increasing material flow b. Focusing on the customer and workforce involvement c. Rewarding employees and keeping defect rates below 2% d. Minimizing inventories and keeping defect rates below 1% 10. Calculate the number of inventory containers required, given the following: Demand rate = 10 parts per hour, Safety stock required = 15% Container size = 5 parts, Time to cycle through entire system = 6 hours a. 12 b. 13 c. 14 d. 15 ANS: C 11. Calculate the inventory container size required given the following: Demand rate = 10 parts per hour, Safety stock required = 15% Number of containers = 14, Time to cycle through entire system = 6 hours a. 2 parts b. 3 parts c. 4 parts d. 5 parts ANS: D 12. Calculate the defects per million opportunities (DPMO) given the following: Blake, owner of Blakester's T-shirt Shoppe, keeps track of customer complaints. For each T-shirt sold, there are four possible complaints: T-shirt shrinks, poor quality, design wears off, and doesn't fit right. Each week, Blake calculates the rate of T-shirt "defects" per total T-shirts sold, and then uses this information to determine his company's DPMO. During the past week, his company sold 1200 T- shirts. His company received 22 customer shrinkage complaints, 16 poor quality complaints, 12 design wears off complaints, 8 doesn't fit right complaints. Calculate his firm's DPMO. a. 69,600 b c d. 12,083 ANS: D 13. Which of the following quality gurus believed that companies should strive for zero defects and that quality was, in a sense, free since quality improvement programs invariably paid for themselves? a. Juran b. Deming c. Baldrige d. Crosby

5 ANS: D 14. The ISO certification standard for environmental management is: a. ISO 9000 b. ISO 9005 c. ISO d. ISO ANS: C 15. A company that produces 8 pound bags of rice gathered 5 samples of 6 bags each. The weights of each bags' contents are listed below. Bag Number Sample What would you plot on the x-bar chart for sample 2? a. All of the following numbers: 8.33, 8.22, 8.08, 8.51, 8.41, 8.28 b. All of the following numbers: 8.34, 8.22, 7.77, 8.18, 8.13 c. Only d. Only ANS: D 16. A company sells eggs in boxes with 12 cartons and 12 eggs in each carton, thus there are 144 eggs in each box. The organization wants to construct a P-chart to track the proportion of broken eggs in each sample. If the company used one box of eggs in each sample in the dataset, what would be the centerline, upper control limit(ucl), and lower control limit(lcl) for the appropriate P-chart? (Use z = 3.) Choose the closest answer. Sample Eggs Sample Eggs Sample Eggs TOTAL 72 a. Centerline = 0.50, UCL = 0.625, LCL = b. Centerline = 0.025, UCL = 0.64, LCL = 0 c. Centerline = 0.30, UCL = 0.70, LCL = 0 d. Centerline = 0.083, UCL = 0.152, LCL = SHORT ANSWER 1. Why is the workforce considered such an important element of lean production?

6 ANS: Lean production is a philosophy that centers upon the ideals of eliminating waste and continuously improving. Employees are the keys to identifying and developing waste reduction programs and building a culture of continuous improvement in a flexible production environment. But here are some ways employees contribute to eliminating waste, creating a flexible production system, and improving the organization: a. Cross trained employees add processing flexibility b. Employees are capable of inspecting quality throughout the processing stages c. Employees not only identify problems, but are empowered to fix problems d. Skilled and well trained employees are more equipped to identify and fix high-level problems e. An intelligent workforce is more capable of supporting a strong program of continuous improvement 2. Provide a very brief overview of the beliefs of each of the following quality professionals: W. E. Deming, Philip Crosby, and Joseph Juran: ANS: a. W. E. Deming: since managers developed a system used by an organization, managers are ultimately responsible for the organization's problems. Management should fix problems by using the right tools and resources, demonstrating employee encouragement, program commitment, and facilitating cultural change. Deming also developed the 14 points for management that are similar to the principles of TQM. b. Philip Crosby: Strive for zero defects. Quality is free quality programs invariably paid for themselves. Developed four absolutes of quality conform to requirements, practice prevention, zero defects, the measure of quality is the price of nonconformance. Crosby also emphasized management's commitment, prevention systems, employee education and training, and continuous assessment. Crosby also developed the 14 steps to quality improvement. c. Joseph Juran: Advocated the determination of costs of quality, and the use of statistical methods. He felt costs caught the attention of managers, and statistics caught the attention of workers. Juran created the quality trilogy: quality planning, quality control, and quality improvement. 3. Discuss the linkages between lean production and environmental sustainability. ANS:

7 Since lean production is ultimately concerned with waste reduction throughout the firm and its supply chains, the linkage between lean production and environmental sustainability should seem clear. Many organizations have realized the positive impact lean production can have on their environmental performance adopting lean practices reduces the cost of environmental management and then leads to improved environmental performance. Further, lean production increases the possibility that firms will adopt more advanced environmental management systems, leading to yet further improvements in environmental performance. 4. Briefly describe SPC and Acceptance Sampling. What is the key difference between the two? ANS: a. SPC SPC stands for statistical process control. SPC is a statistical quality control method. SPC monitors quality during production through the use of statistical methods. In other words, it is a way to monitor the quality being output by a process using statistical methods. SPC allows firms to visually monitor performance, compare the performance to desired levels or standards, and take corrective steps quickly before major errors are made and/or reach the customer. b. Acceptance Sampling Acceptance sampling is also a statistical quality control method. Acceptance sampling determines the quality of a finished batch of product based upon statistical methods using a sample of finished batch. DIFFERENCE: While both SPC and acceptance sampling are statistical quality control methods, SPC monitors quality during production in the hopes of detecting defects early in the process and preventing continued production of defective product. Acceptance sampling, on the other hand, measures quality of finished products. Acceptance sampling is utilized only after processing is complete. In some cases, though, it may be the only statistical quality control method option, especially if the organization is purchasing product rather than producing it. ESSAY 1. What are the TWO primary techniques/philosophies discussed in Chapter 8 that are used to manage processes in the supply chain such that they'll meet the needs of customers today. Provide the prime objectives for each of the two techniques/philosophies. Also, for each technique, provide three elements used to achieve the prime objectives. ANS: 1. Lean production a. The prime objectives of lean production are to employ a program of continuous improvement in order to minimize/eliminate waste. b. The elements of lean used to achieve the prime objectives are: i. Waste reduction ii. Close supplier and customer relationships iii. Effective and efficient layouts iv. Inventory reduction programs v. Effective and efficient scheduling

8 vi. vii. viii. Developing and promoting programs of continuous improvement within the organization and throughout the supply chain Exemplifying a commitment to the workforce JIT II/supplier co-location supplier representative housed in a buyer facility 2. Six Sigma a. The prime objectives of Six Sigma are to understand, meet, and then strive to exceed customer expectations. In essence, Six Sigma is all about pleasing the customer. Six Sigma programs attempt to make a firm capable of satisfying customers in the present as well is in the future. b. The elements of Six Sigma are: i. Focus on the Customer ii. Workforce Involvement iii. The philosophies of Deming iv. The philosophies of Crosby v. The philosophies of Juran vi. The guidelines of the Malcolm Baldrige National Quality Award vii. viii. The guidelines/standards required to become ISO 9000 certified Utilization of Six Sigma tools: flow diagrams, check sheets, Pareto charts, cause-and-effect diagrams, SPC, acceptance sampling

Introduction on Lean, six sigma and Lean game. Remco Paulussen, Statistics Netherlands Anne S. Trolie, Statistics Norway

Introduction on Lean, six sigma and Lean game. Remco Paulussen, Statistics Netherlands Anne S. Trolie, Statistics Norway Introduction on Lean, six sigma and Lean game Remco Paulussen, Statistics Netherlands Anne S. Trolie, Statistics Norway 1 Lean is. a philosophy a method a set of tools Waste reduction User value Create

More information

APPENDIX A: Process Sigma Table (I)

APPENDIX A: Process Sigma Table (I) APPENDIX A: Process Sigma Table (I) 305 APPENDIX A: Process Sigma Table (II) 306 APPENDIX B: Kinds of variables This summary could be useful for the correct selection of indicators during the implementation

More information

Green Belt Curriculum (This workshop can also be conducted on-site, subject to price change and number of participants)

Green Belt Curriculum (This workshop can also be conducted on-site, subject to price change and number of participants) Green Belt Curriculum (This workshop can also be conducted on-site, subject to price change and number of participants) Notes: 1. We use Mini-Tab in this workshop. Mini-tab is available for free trail

More information

The Lean And Six Sigma Sinergy

The Lean And Six Sigma Sinergy International Journal for Quality research UDK- 658.5 / 006.83 Short Scientific Paper (1.03) The Lean And Six Sigma Sinergy Mirko Sokovic 1) D. Pavletic 2) 1) University of Ljubljana, 2) University of

More information

Certified Six Sigma Professionals International Certification Courses in Six Sigma Green Belt

Certified Six Sigma Professionals International Certification Courses in Six Sigma Green Belt Certification Singapore Institute Certified Six Sigma Professionals Certification Courses in Six Sigma Green Belt ly Licensed Course for Process Improvement/ Assurance Managers and Engineers Leading the

More information

Lean Six Sigma Innovative Safety Management

Lean Six Sigma Innovative Safety Management Session No. 561 Introduction Lean Six Sigma Innovative Safety Management Peter G. Furst, MBA, RA, CSP, ARM, REA Liberty Mutual Group Pleasanton, California The organization s safety effort is to create

More information

Reduce the Failure Rate of the Screwing Process with Six Sigma Approach

Reduce the Failure Rate of the Screwing Process with Six Sigma Approach Proceedings of the 2014 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 2014 Reduce the Failure Rate of the Screwing Process with Six Sigma Approach

More information

Visit us at:

Visit us at: White Paper Integrating Six Sigma and Software Testing Process for Removal of Wastage & Optimizing Resource Utilization 24 October 2013 With resources working for extended hours and in a pressurized environment,

More information

It s a lean life! The Journey

It s a lean life! The Journey It s a lean life! The Journey What is LEAN? Lean Tools-5S, Takt time, Kaizen, SMED, A3, JIT, KANBAN Using the scientific method to continuously improve the business and other related parts of the entire

More information

STABILISATION AND PROCESS IMPROVEMENT IN NAB

STABILISATION AND PROCESS IMPROVEMENT IN NAB STABILISATION AND PROCESS IMPROVEMENT IN NAB Authors: Nicole Warren Quality & Process Change Manager, Bachelor of Engineering (Hons) and Science Peter Atanasovski - Quality & Process Change Manager, Bachelor

More information

Editor s Welcome. Summer 2016 Lean Six Sigma Innovation. You Deserve More. Lean Innovation: The Art of Making Less Into More

Editor s Welcome. Summer 2016 Lean Six Sigma Innovation. You Deserve More. Lean Innovation: The Art of Making Less Into More Summer 2016 Lean Six Sigma Innovation Editor s Welcome Lean Innovation: The Art of Making Less Into More Continuous improvement in business is about more than just a set of operational principles to increase

More information

For Portfolio, Programme, Project, Risk and Service Management. Integrating Six Sigma and PRINCE Mike Ward, Outperfom

For Portfolio, Programme, Project, Risk and Service Management. Integrating Six Sigma and PRINCE Mike Ward, Outperfom For Portfolio, Programme, Project, Risk and Service Management Integrating Six Sigma and PRINCE2 2009 Mike Ward, Outperfom White Paper July 2009 2 Integrating Six Sigma and PRINCE2 2009 Abstract A number

More information

We Are a Place People Can Call Their Medical Home

We Are a Place People Can Call Their Medical Home Going Lean Agenda Introduction and Objectives Borgess Ambulatory Care and its Guiding Principles Overview of Lean Thinking Benefits of Value-Stream Mapping Transforming Office Practice Outcomes What We

More information

The Application of Lean Six Sigma in Alleviating Water Shortage in Limpopo Rural Area to Avoid Societal Disaster

The Application of Lean Six Sigma in Alleviating Water Shortage in Limpopo Rural Area to Avoid Societal Disaster The Application of Lean Six Sigma in Alleviating Water Shortage in Limpopo Rural Area to Avoid Societal Disaster S. Ngoune, P. Kholopane Department of Quality and Operations Management, University of Johannesburg,

More information

Certified Six Sigma - Black Belt VS-1104

Certified Six Sigma - Black Belt VS-1104 Certified Six Sigma - Black Belt VS-1104 Certified Six Sigma - Black Belt Professional Certified Six Sigma - Black Belt Professional Certification Code VS-1104 Vskills certification for Six Sigma - Black

More information

Module Title: Managing and Leading Change. Lesson 4 THE SIX SIGMA

Module Title: Managing and Leading Change. Lesson 4 THE SIX SIGMA Module Title: Managing and Leading Change Lesson 4 THE SIX SIGMA Learning Objectives: At the end of the lesson, the students should be able to: 1. Define what is Six Sigma 2. Discuss the brief history

More information

The Lean Six Sigma Green Belt Examination. Rationale

The Lean Six Sigma Green Belt Examination. Rationale The Lean Six Sigma Green elt Examination Rationale isqi GmbH 2016 1 U60323 - Level III reating Stable and Efficient Processes escribe and review qualitative and quantitative data, continuous (variables)

More information

The CTQ Flowdown as a Conceptual Model of Project Objectives

The CTQ Flowdown as a Conceptual Model of Project Objectives The CTQ Flowdown as a Conceptual Model of Project Objectives HENK DE KONING AND JEROEN DE MAST INSTITUTE FOR BUSINESS AND INDUSTRIAL STATISTICS OF THE UNIVERSITY OF AMSTERDAM (IBIS UVA) 2007, ASQ The purpose

More information

TUESDAYS/THURSDAYS, NOV. 11, 2014-FEB. 12, 2015 x COURSE NUMBER 6520 (1)

TUESDAYS/THURSDAYS, NOV. 11, 2014-FEB. 12, 2015 x COURSE NUMBER 6520 (1) MANAGERIAL ECONOMICS David.surdam@uni.edu PROFESSOR SURDAM 204 CBB TUESDAYS/THURSDAYS, NOV. 11, 2014-FEB. 12, 2015 x3-2957 COURSE NUMBER 6520 (1) This course is designed to help MBA students become familiar

More information

An Introduction to Simio for Beginners

An Introduction to Simio for Beginners An Introduction to Simio for Beginners C. Dennis Pegden, Ph.D. This white paper is intended to introduce Simio to a user new to simulation. It is intended for the manufacturing engineer, hospital quality

More information

Measurement & Analysis in the Real World

Measurement & Analysis in the Real World Measurement & Analysis in the Real World Tools for Cleaning Messy Data Will Hayes SEI Robert Stoddard SEI Rhonda Brown SEI Software Solutions Conference 2015 November 16 18, 2015 Copyright 2015 Carnegie

More information

CHAPTER 4: REIMBURSEMENT STRATEGIES 24

CHAPTER 4: REIMBURSEMENT STRATEGIES 24 CHAPTER 4: REIMBURSEMENT STRATEGIES 24 INTRODUCTION Once state level policymakers have decided to implement and pay for CSR, one issue they face is simply how to calculate the reimbursements to districts

More information

2 Lean Six Sigma Green Belt Skill Set

2 Lean Six Sigma Green Belt Skill Set 2 Lean Six Sigma Green Belt Skill Set 3 LEAN SIX SIGMA GREEN BELT SKILL SET A GUIDELINE FOR LEAN SIX SIGMA GREEN BELT TRAINING AND CERTIFICATION H.C. Theisens; A. Meek; D. Harborne VERSION 2.4 Lean Six

More information

Firms and Markets Saturdays Summer I 2014

Firms and Markets Saturdays Summer I 2014 PRELIMINARY DRAFT VERSION. SUBJECT TO CHANGE. Firms and Markets Saturdays Summer I 2014 Professor Thomas Pugel Office: Room 11-53 KMC E-mail: tpugel@stern.nyu.edu Tel: 212-998-0918 Fax: 212-995-4212 This

More information

Utilizing Soft System Methodology to Increase Productivity of Shell Fabrication Sushant Sudheer Takekar 1 Dr. D.N. Raut 2

Utilizing Soft System Methodology to Increase Productivity of Shell Fabrication Sushant Sudheer Takekar 1 Dr. D.N. Raut 2 IJSRD - International Journal for Scientific Research & Development Vol. 2, Issue 04, 2014 ISSN (online): 2321-0613 Utilizing Soft System Methodology to Increase Productivity of Shell Fabrication Sushant

More information

University of Groningen. Systemen, planning, netwerken Bosman, Aart

University of Groningen. Systemen, planning, netwerken Bosman, Aart University of Groningen Systemen, planning, netwerken Bosman, Aart IMPORTANT NOTE: You are advised to consult the publisher's version (publisher's PDF) if you wish to cite from it. Please check the document

More information

Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company

Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company Inventory management optimization using lean six-sigma Case of Spare parts Moroccan company Zoubida Benmamoun BOSS team GS laboratory ENSA University campus PO Box 242.kenitra14000 morocco benmamoun_zoubida@yahoo.fr

More information

Software Maintenance

Software Maintenance 1 What is Software Maintenance? Software Maintenance is a very broad activity that includes error corrections, enhancements of capabilities, deletion of obsolete capabilities, and optimization. 2 Categories

More information

Massachusetts Hospital Lean Network

Massachusetts Hospital Lean Network Extending Your Lean Journey through Design and Construction Projects Nick Masci, Dacon Paul Fallon, TRO JB January 22, 2013 AGENDA Introductions and Definitions Concepts Strength of cross collaboration

More information

Like much of the country, Detroit suffered significant job losses during the Great Recession.

Like much of the country, Detroit suffered significant job losses during the Great Recession. 36 37 POPULATION TRENDS Economy ECONOMY Like much of the country, suffered significant job losses during the Great Recession. Since bottoming out in the first quarter of 2010, however, the city has seen

More information

Economics 201 Principles of Microeconomics Fall 2010 MWF 10:00 10:50am 160 Bryan Building

Economics 201 Principles of Microeconomics Fall 2010 MWF 10:00 10:50am 160 Bryan Building Economics 201 Principles of Microeconomics Fall 2010 MWF 10:00 10:50am 160 Bryan Building Professor: Dr. Michelle Sheran Office: 445 Bryan Building Phone: 256-1192 E-mail: mesheran@uncg.edu Office Hours:

More information

BEST OFFICIAL WORLD SCHOOLS DEBATE RULES

BEST OFFICIAL WORLD SCHOOLS DEBATE RULES BEST OFFICIAL WORLD SCHOOLS DEBATE RULES Adapted from official World Schools Debate Championship Rules *Please read this entire document thoroughly. CONTENTS I. Vocabulary II. Acceptable Team Structure

More information

Functional Maths Skills Check E3/L x

Functional Maths Skills Check E3/L x Functional Maths Skills Check E3/L1 Name: Date started: The Four Rules of Number + - x May 2017. Kindly contributed by Nicola Smith, Gloucestershire College. Search for Nicola on skillsworkshop.org Page

More information

OCR for Arabic using SIFT Descriptors With Online Failure Prediction

OCR for Arabic using SIFT Descriptors With Online Failure Prediction OCR for Arabic using SIFT Descriptors With Online Failure Prediction Andrey Stolyarenko, Nachum Dershowitz The Blavatnik School of Computer Science Tel Aviv University Tel Aviv, Israel Email: stloyare@tau.ac.il,

More information

THE VIRTUAL WELDING REVOLUTION HAS ARRIVED... AND IT S ON THE MOVE!

THE VIRTUAL WELDING REVOLUTION HAS ARRIVED... AND IT S ON THE MOVE! THE VIRTUAL WELDING REVOLUTION HAS ARRIVED... AND IT S ON THE MOVE! VRTEX 2 The Lincoln Electric Company MANUFACTURING S WORKFORCE CHALLENGE Anyone who interfaces with the manufacturing sector knows this

More information

Centre for Evaluation & Monitoring SOSCA. Feedback Information

Centre for Evaluation & Monitoring SOSCA. Feedback Information Centre for Evaluation & Monitoring SOSCA Feedback Information Contents Contents About SOSCA... 3 SOSCA Feedback... 3 1. Assessment Feedback... 4 2. Predictions and Chances Graph Software... 7 3. Value

More information

Answer each question by placing an X over the appropriate answer. Select only one answer for each question.

Answer each question by placing an X over the appropriate answer. Select only one answer for each question. Name: Date: Position Applied For: This test contains three short sections. The first section requires that you calculate the correct answer for a number of arithmetic problems. The second section requires

More information

Book Review: Build Lean: Transforming construction using Lean Thinking by Adrian Terry & Stuart Smith

Book Review: Build Lean: Transforming construction using Lean Thinking by Adrian Terry & Stuart Smith Howell, Greg (2011) Book Review: Build Lean: Transforming construction using Lean Thinking by Adrian Terry & Stuart Smith. Lean Construction Journal 2011 pp 3-8 Book Review: Build Lean: Transforming construction

More information

Expert Reference Series of White Papers. Mastering Problem Management

Expert Reference Series of White Papers. Mastering Problem Management Expert Reference Series of White Papers Mastering Problem Management 1-800-COURSES www.globalknowledge.com Mastering Problem Management Hank Marquis, PhD, FBCS, CITP Introduction IT Organization (ITO)

More information

Driving Competitiveness. Delivering Growth and Sustainable Jobs. 29 May 2013 Dublin Castle, Ireland

Driving Competitiveness. Delivering Growth and Sustainable Jobs. 29 May 2013 Dublin Castle, Ireland Driving Competitiveness Delivering Growth and Sustainable Jobs 29 May 2013 Dublin Castle, Ireland Driving Competitiveness at SteriPack Cormac Kinahan BRIEF INTRODUCTION TO STERIPACK Established in 1994,

More information

Executive Guide to Simulation for Health

Executive Guide to Simulation for Health Executive Guide to Simulation for Health Simulation is used by Healthcare and Human Service organizations across the World to improve their systems of care and reduce costs. Simulation offers evidence

More information

READY TO WORK PROGRAM INSTRUCTOR GUIDE PART I

READY TO WORK PROGRAM INSTRUCTOR GUIDE PART I READY TO WORK PROGRAM INSTRUCTOR GUIDE PART I LESSON TITLE: Problem Solving Tools Method: Informal Lecture, Guided Discussion EDUCATIONAL OBJECTIVE: Comprehend the many different uses of quality/problem

More information

Problem Solving for Success Handbook. Solve the Problem Sustain the Solution Celebrate Success

Problem Solving for Success Handbook. Solve the Problem Sustain the Solution Celebrate Success Problem Solving for Success Handbook Solve the Problem Sustain the Solution Celebrate Success Problem Solving for Success Handbook Solve the Problem Sustain the Solution Celebrate Success Rod Baxter 2015

More information

Lean Six Sigma Report - No. 03

Lean Six Sigma Report - No. 03 Lean Six Sigma Report - No. 03 Since 2000, literally thousands of companies have implemented improvement initiatives. The questions we want to answer here are what are the mistakes being made that we need

More information

For Your Future. For Our Future. ULS Strategic Framework

For Your Future. For Our Future. ULS Strategic Framework For Your Future. For Our Future. ULS Strategic Framework Contents Mission Vision Development Introduction Framework For Your Future. For Our Future. Academic Success, Student Success & Educational Attainment

More information

UvA-DARE (Digital Academic Repository) Lean Six Sigma in financial services de Koning, H.; Does, R.J.M.M.; Bisgaard, S.

UvA-DARE (Digital Academic Repository) Lean Six Sigma in financial services de Koning, H.; Does, R.J.M.M.; Bisgaard, S. UvA-DARE (Digital Academic Repository) Lean Six Sigma in financial services de Koning, H.; Does, R.J.M.M.; Bisgaard, S. Published in: International Journal of Six Sigma and Competitive Advantage DOI: 10.1504/IJSSCA.2008.018417

More information

The Roaring 20s. History. igcse Examination Technique. Paper 2. International Organisations. September 2015 onwards

The Roaring 20s. History. igcse Examination Technique. Paper 2. International Organisations. September 2015 onwards History The Roaring 20s igcse Examination Technique Paper 2 International Organisations September 2015 onwards 1 Assessment Overview Paper 2 50% of total igcse marks 90 minutes Historical investigation

More information

Major Milestones, Team Activities, and Individual Deliverables

Major Milestones, Team Activities, and Individual Deliverables Major Milestones, Team Activities, and Individual Deliverables Milestone #1: Team Semester Proposal Your team should write a proposal that describes project objectives, existing relevant technology, engineering

More information

Testimony in front of the Assembly Committee on Jobs and the Economy Special Session Assembly Bill 1 Ray Cross, UW System President August 3, 2017

Testimony in front of the Assembly Committee on Jobs and the Economy Special Session Assembly Bill 1 Ray Cross, UW System President August 3, 2017 Office of the President 1700 Van Hise Hall 1220 Linden Drive Madison, Wisconsin 53706-1559 (608) 262-2321 Phone (608) 262-3985 Fax e-mail: rcross@uwsa.edu website: www.wisconsin.edu/ Testimony in front

More information

ScienceDirect. A Lean Six Sigma (LSS) project management improvement model. Alexandra Tenera a,b *, Luis Carneiro Pintoª. 27 th IPMA World Congress

ScienceDirect. A Lean Six Sigma (LSS) project management improvement model. Alexandra Tenera a,b *, Luis Carneiro Pintoª. 27 th IPMA World Congress Available online at www.sciencedirect.com ScienceDirect Procedia - Social and Behavioral Scien ce s 119 ( 2014 ) 912 920 27 th IPMA World Congress A Lean Six Sigma (LSS) project management improvement

More information

Minitab Tutorial (Version 17+)

Minitab Tutorial (Version 17+) Minitab Tutorial (Version 17+) Basic Commands and Data Entry Graphical Tools Descriptive Statistics Outline Minitab Basics Basic Commands, Data Entry, and Organization Minitab Project Files (*.MPJ) vs.

More information

IT4305: Rapid Software Development Part 2: Structured Question Paper

IT4305: Rapid Software Development Part 2: Structured Question Paper UNIVERSITY OF COLOMBO, SRI LANKA UNIVERSITY OF COLOMBO SCHOOL OF COMPUTING DEGREE OF BACHELOR OF INFORMATION TECHNOLOGY (EXTERNAL) Academic Year 2014/2015 2 nd Year Examination Semester 4 IT4305: Rapid

More information

1 Copyright Texas Education Agency, All rights reserved.

1 Copyright Texas Education Agency, All rights reserved. Lesson Plan-Diversity at Work Course Title: Business Information Management II Session Title: Diversity at Work Performance Objective: Upon completion of this lesson, students will understand diversity

More information

LEAN HOSPITALS. Improving Quality, Patient Safety, and Employee Engagement. Third Edition

LEAN HOSPITALS. Improving Quality, Patient Safety, and Employee Engagement. Third Edition LEAN HOSPITALS Improving Quality, Patient Safety, and Employee Engagement Third Edition This is a book I feel privileged and honored to write (and update), as it would have been hard to imagine my career

More information

Tracy Dudek & Jenifer Russell Trinity Services, Inc. *Copyright 2008, Mark L. Sundberg

Tracy Dudek & Jenifer Russell Trinity Services, Inc. *Copyright 2008, Mark L. Sundberg Tracy Dudek & Jenifer Russell Trinity Services, Inc. *Copyright 2008, Mark L. Sundberg Verbal Behavior-Milestones Assessment & Placement Program Criterion-referenced assessment tool Guides goals and objectives/benchmark

More information

ACCOUNTING (ACC) Fall Faculty information for this program can be found at

ACCOUNTING (ACC) Fall Faculty information for this program can be found at ACCOUNTING (ACC) Fall 2017 Accounting (ACC) Minor in Accounting College of Business Dean: Manuel London Associate Dean: Dmytro Holod Director of Undergraduate Studies: Richard Laskowski Office of Student

More information

Name: Class: Date: ID: A

Name: Class: Date: ID: A Name: Class: _ Date: _ Test Review Multiple Choice Identify the choice that best completes the statement or answers the question. 1. Members of a high school club sold hamburgers at a baseball game to

More information

Colorado State University Department of Construction Management. Assessment Results and Action Plans

Colorado State University Department of Construction Management. Assessment Results and Action Plans Colorado State University Department of Construction Management Assessment Results and Action Plans Updated: Spring 2015 Table of Contents Table of Contents... 2 List of Tables... 3 Table of Figures...

More information

University of North Carolina at Greensboro Bryan School of Business and Economics Department of Information Systems and Supply Chain Management

University of North Carolina at Greensboro Bryan School of Business and Economics Department of Information Systems and Supply Chain Management University of North Carolina at Greensboro Bryan School of Business and Economics Department of Information Systems and Supply Chain Management SCM-402 Fall 2015 INTRODUCTION TO SUPPLY CHAIN MANAGEMENT

More information

Learning Disability Functional Capacity Evaluation. Dear Doctor,

Learning Disability Functional Capacity Evaluation. Dear Doctor, Dear Doctor, I have been asked to formulate a vocational opinion regarding NAME s employability in light of his/her learning disability. To assist me with this evaluation I would appreciate if you can

More information

Practical Applications of Statistical Process Control

Practical Applications of Statistical Process Control feature measurement Practical Applications of Statistical Process Control Applying quantitative methods such as statistical process control to software development projects can provide a positive cost

More information

Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter

Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter 2010. http://www.methodsandtools.com/ Summary Business needs for process improvement projects are changing. Organizations

More information

Cooking Matters at the Store Evaluation: Executive Summary

Cooking Matters at the Store Evaluation: Executive Summary Cooking Matters at the Store Evaluation: Executive Summary Introduction Share Our Strength is a national nonprofit with the goal of ending childhood hunger in America by connecting children with the nutritious

More information

Leveraging MOOCs to bring entrepreneurship and innovation to everyone on campus

Leveraging MOOCs to bring entrepreneurship and innovation to everyone on campus Paper ID #9305 Leveraging MOOCs to bring entrepreneurship and innovation to everyone on campus Dr. James V Green, University of Maryland, College Park Dr. James V. Green leads the education activities

More information

Case study Norway case 1

Case study Norway case 1 Case study Norway case 1 School : B (primary school) Theme: Science microorganisms Dates of lessons: March 26-27 th 2015 Age of students: 10-11 (grade 5) Data sources: Pre- and post-interview with 1 teacher

More information

Infrared Paper Dryer Control Scheme

Infrared Paper Dryer Control Scheme Infrared Paper Dryer Control Scheme INITIAL PROJECT SUMMARY 10/03/2005 DISTRIBUTED MEGAWATTS Carl Lee Blake Peck Rob Schaerer Jay Hudkins 1. Project Overview 1.1 Stake Holders Potlatch Corporation, Idaho

More information

USC MARSHALL SCHOOL OF BUSINESS

USC MARSHALL SCHOOL OF BUSINESS USC MARSHALL SCHOOL OF BUSINESS SUPPLY CHAIN MANAGEMENT IOM 482 Fall 2013 INSTRUCTOR OFFICE HOURS Professor Murat Bayiz Bridge Hall, Room 401G Phone: (213) 740 5618 E-mail: murat.bayiz@marshall.usc.edu

More information

Planning for Preassessment. Kathy Paul Johnston CSD Johnston, Iowa

Planning for Preassessment. Kathy Paul Johnston CSD Johnston, Iowa Planning for Preassessment Kathy Paul Johnston CSD Johnston, Iowa Why Plan? Establishes the starting point for learning Students can t learn what they already know Match instructional strategies to individual

More information

Selling To Different Styles

Selling To Different Styles Selling To Different s Michael R. Perrault and Kenneth R. Brousseau Decision Dynamics LLC 1988, 2006 by Michael R. Perrault and Kenneth R. Brousseau. Published by Decision Dynamics LLC. Selling To Different

More information

MARKETING MANAGEMENT II: MARKETING STRATEGY (MKTG 613) Section 007

MARKETING MANAGEMENT II: MARKETING STRATEGY (MKTG 613) Section 007 MARKETING MANAGEMENT II: MARKETING STRATEGY (MKTG 613) Section 007 February 2017 COURSE DESCRIPTION, REQUIREMENTS AND ASSIGNMENTS Professor David J. Reibstein Objectives Building upon Marketing 611, this

More information

Name Class Date. Graphing Proportional Relationships

Name Class Date. Graphing Proportional Relationships Name Class Date Practice 5-1 Graphing Proportional Relationships 5-1 Graphing Proportional Relationships 1. An electronics store has a frequent shopper program. The buyer earns 4 points for every movie

More information

Value Creation Through! Integration Workshop! Value Stream Analysis and Mapping for PD! January 31, 2002!

Value Creation Through! Integration Workshop! Value Stream Analysis and Mapping for PD! January 31, 2002! Presented by:! Hugh McManus for Rich Millard! MIT! Value Creation Through! Integration Workshop! Value Stream Analysis and Mapping for PD!!!! January 31, 2002! Steps in Lean Thinking (Womack and Jones)!

More information

learning collegiate assessment]

learning collegiate assessment] [ collegiate learning assessment] INSTITUTIONAL REPORT 2005 2006 Kalamazoo College council for aid to education 215 lexington avenue floor 21 new york new york 10016-6023 p 212.217.0700 f 212.661.9766

More information

PROVIDENCE UNIVERSITY COLLEGE

PROVIDENCE UNIVERSITY COLLEGE BACHELOR OF BUSINESS ADMINISTRATION (BBA) WITH CO-OP (4 Year) Academic Staff Jeremy Funk, Ph.D., University of Manitoba, Program Coordinator Bruce Duggan, M.B.A., University of Manitoba Marcio Coelho,

More information

The Good Judgment Project: A large scale test of different methods of combining expert predictions

The Good Judgment Project: A large scale test of different methods of combining expert predictions The Good Judgment Project: A large scale test of different methods of combining expert predictions Lyle Ungar, Barb Mellors, Jon Baron, Phil Tetlock, Jaime Ramos, Sam Swift The University of Pennsylvania

More information

On Human Computer Interaction, HCI. Dr. Saif al Zahir Electrical and Computer Engineering Department UBC

On Human Computer Interaction, HCI. Dr. Saif al Zahir Electrical and Computer Engineering Department UBC On Human Computer Interaction, HCI Dr. Saif al Zahir Electrical and Computer Engineering Department UBC Human Computer Interaction HCI HCI is the study of people, computer technology, and the ways these

More information

Student Transportation

Student Transportation The district has not developed systems to evaluate transportation activities and improve operations. In addition, the district needs to systematically replace its aging buses. Conclusion The Manatee County

More information

SANTIAGO CANYON COLLEGE STUDENT PLACEMENTOFFICE PROGRAM REVIEW SPRING SEMESTER, 2010

SANTIAGO CANYON COLLEGE STUDENT PLACEMENTOFFICE PROGRAM REVIEW SPRING SEMESTER, 2010 SANTIAGO CANYON COLLEGE STUDENT PLACEMENTOFFICE PROGRAM REVIEW SPRING SEMESTER, 2010 Section I. Signature Page Signature of Program Leader Syed Rizvi Date: Printed Name/Title Signature of Vice President,

More information

Planning for Preassessment. Kathy Paul Johnston CSD Johnston, Iowa

Planning for Preassessment. Kathy Paul Johnston CSD Johnston, Iowa Planning for Preassessment Kathy Paul Johnston CSD Johnston, Iowa Why Plan? Establishes the starting point for learning Students can t learn what they already know Match instructional strategies to individual

More information

Radius STEM Readiness TM

Radius STEM Readiness TM Curriculum Guide Radius STEM Readiness TM While today s teens are surrounded by technology, we face a stark and imminent shortage of graduates pursuing careers in Science, Technology, Engineering, and

More information

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS C2ER / LMI INSTITUTE IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS JUNE 09 2016 US DEPARTMENT OF LABOR MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM Introductions

More information

Lean in Henkel Adhesives, Europe

Lean in Henkel Adhesives, Europe Lean in Henkel Adhesives, Europe Vladimir Martinenko, Manager Lean Enterprise Europe CEE South & Central Asia and Caucasus 1. Kaizen Congress in Serbia Belgrade, 28 th of Sept. 2017 Agenda 1. Did you know

More information

Spring 2015 IET4451 Systems Simulation Course Syllabus for Traditional, Hybrid, and Online Classes

Spring 2015 IET4451 Systems Simulation Course Syllabus for Traditional, Hybrid, and Online Classes Spring 2015 IET4451 Systems Simulation Course Syllabus for Traditional, Hybrid, and Online Classes Instructor: Dr. Gregory L. Wiles Email Address: Use D2L e-mail, or secondly gwiles@spsu.edu Office: M

More information

Lesson M4. page 1 of 2

Lesson M4. page 1 of 2 Lesson M4 page 1 of 2 Miniature Gulf Coast Project Math TEKS Objectives 111.22 6b.1 (A) apply mathematics to problems arising in everyday life, society, and the workplace; 6b.1 (C) select tools, including

More information

Case Study Analysis of Six Sigma in Singapore Service Organizations

Case Study Analysis of Six Sigma in Singapore Service Organizations Case Study Analysis of Six Sigma in Singapore Service Organizations A. Chakrabarty and K.C. Tan, Department of Industrial and Systems Engineering, National University of Singapore, Singapore Abstract This

More information

Mathematics process categories

Mathematics process categories Mathematics process categories All of the UK curricula define multiple categories of mathematical proficiency that require students to be able to use and apply mathematics, beyond simple recall of facts

More information

Barriers and Enablers of Lean Tools in Medical Laboratory Industry: A Case of Namibia

Barriers and Enablers of Lean Tools in Medical Laboratory Industry: A Case of Namibia Barriers and Enablers of Lean Tools in Medical Laboratory Industry: A Case of Namibia Michael Mutingi Faculty of Engineering, Namibia University of Science and Technology, Windhoek, Namibia Faculty of

More information

Citation for published version (APA): de Koning, H., Does, R. J. M. M., & de Mast, J. (2005). Lean Six Sigma. Kwaliteit in bedrijf, 21(8),

Citation for published version (APA): de Koning, H., Does, R. J. M. M., & de Mast, J. (2005). Lean Six Sigma. Kwaliteit in bedrijf, 21(8), UvA-DARE (Digital Academic Repository) Lean Six Sigma de Koning, H.; Does, R.J.M.M.; de Mast, J. Published in: Kwaliteit in bedrijf Link to publication Citation for published version (APA): de Koning,

More information

BADM 641 (sec. 7D1) (on-line) Decision Analysis August 16 October 6, 2017 CRN: 83777

BADM 641 (sec. 7D1) (on-line) Decision Analysis August 16 October 6, 2017 CRN: 83777 BADM 641 (sec. 7D1) (on-line) Decision Analysis August 16 October 6, 2017 CRN: 83777 SEMESTER: Fall 2017 INSTRUCTOR: Jack Fuller, Ph.D. OFFICE: 108 Business and Economics Building, West Virginia University,

More information

In The Discipline of Market Leaders: Knowledge Management Based on your Organization's Approach to Life: Operational Excellence

In The Discipline of Market Leaders: Knowledge Management Based on your Organization's Approach to Life: Operational Excellence Knowledge Management Based on your Organization's Approach to Life: Operational Excellence OE networks, metrics, and more; second in a series. Melissie Rumizen, Jeff Stemke, and Bill Baker In The Discipline

More information

FIN 571 International Business Finance

FIN 571 International Business Finance FIN 571 International Business Finance I. Course Description The scope and content of international finance have been fast evolving due to the deregulation of financial markets, product innovations, and

More information

Let's Learn English Lesson Plan

Let's Learn English Lesson Plan Let's Learn English Lesson Plan Introduction: Let's Learn English lesson plans are based on the CALLA approach. See the end of each lesson for more information and resources on teaching with the CALLA

More information

ADDIE: A systematic methodology for instructional design that includes five phases: Analysis, Design, Development, Implementation, and Evaluation.

ADDIE: A systematic methodology for instructional design that includes five phases: Analysis, Design, Development, Implementation, and Evaluation. ADDIE: A systematic methodology for instructional design that includes five phases: Analysis, Design, Development, Implementation, and Evaluation. I first was exposed to the ADDIE model in April 1983 at

More information

A Survey on Six Sigma Implementation in Singapore Service Industries

A Survey on Six Sigma Implementation in Singapore Service Industries A Survey on Six Sigma Implementation in Singapore Service Industries Ayon Chakrabarty 1, Kay Chuan Tan 2 Department of Industrial and Systems Engineering, National University of Singapore Abstract: The

More information

STT 231 Test 1. Fill in the Letter of Your Choice to Each Question in the Scantron. Each question is worth 2 point.

STT 231 Test 1. Fill in the Letter of Your Choice to Each Question in the Scantron. Each question is worth 2 point. STT 231 Test 1 Fill in the Letter of Your Choice to Each Question in the Scantron. Each question is worth 2 point. 1. A professor has kept records on grades that students have earned in his class. If he

More information

Beyond the Blend: Optimizing the Use of your Learning Technologies. Bryan Chapman, Chapman Alliance

Beyond the Blend: Optimizing the Use of your Learning Technologies. Bryan Chapman, Chapman Alliance 901 Beyond the Blend: Optimizing the Use of your Learning Technologies Bryan Chapman, Chapman Alliance Power Blend Beyond the Blend: Optimizing the Use of Your Learning Infrastructure Facilitator: Bryan

More information

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. PROFESSIONAL PRACTICE IDT 2021(formerly IDT 2020) Class Hours: 2.0 Credit Hours: 2.

PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS. PROFESSIONAL PRACTICE IDT 2021(formerly IDT 2020) Class Hours: 2.0 Credit Hours: 2. PELLISSIPPI STATE TECHNICAL COMMUNITY COLLEGE MASTER SYLLABUS PROFESSIONAL PRACTICE IDT 2021(formerly IDT 2020) Class Hours: 2.0 Credit Hours: 2.0 Laboratory Hours: 0.0 Revised: Spring 04 NOTE: This course

More information

Shank, Matthew D. (2009). Sports marketing: A strategic perspective (4th ed.). Upper Saddle River, NJ: Pearson/Prentice Hall.

Shank, Matthew D. (2009). Sports marketing: A strategic perspective (4th ed.). Upper Saddle River, NJ: Pearson/Prentice Hall. BSM 2801, Sport Marketing Course Syllabus Course Description Examines the theoretical and practical implications of marketing in the sports industry by presenting a framework to help explain and organize

More information

The Four Principal Parts of Verbs. The building blocks of all verb tenses.

The Four Principal Parts of Verbs. The building blocks of all verb tenses. The Four Principal Parts of Verbs The building blocks of all verb tenses. The Four Principal Parts Every verb has four principal parts: walk is walking walked has walked Notice that the and the both have

More information

McDonald's Corporation

McDonald's Corporation McDonald's Corporation Case Writeup Individual Case # 2 The George Washington University Executive MBA Program EMBA 220: Operations Management Professor Sanjay Jain, Ph.D. February 20, 2010 Robert Paul

More information