Infrared Paper Dryer Control Scheme

Size: px
Start display at page:

Download "Infrared Paper Dryer Control Scheme"

Transcription

1 Infrared Paper Dryer Control Scheme INITIAL PROJECT SUMMARY 10/03/2005 DISTRIBUTED MEGAWATTS Carl Lee Blake Peck Rob Schaerer Jay Hudkins

2 1. Project Overview 1.1 Stake Holders Potlatch Corporation, Idaho Pulp and Paper Division Potlatch Corporation will be acting as the customer, client, and sponsor for this project. Potlatch will be providing all funds, and will use the improved control algorithm. Dr. Joe Law Dr. Law will be both the project s faculty advisor and the capstone instructor. Mr. Jerry Spenser Jerry Spenser is the Chief Electrical Engineer and will be our contact with the Potlatch Corporation. Mr. Tom McLaughlin Tom is the Engineering Department Manager. The University of Idaho The University benefits from all student projects. Team Distributed Megawatts We will be exposed to all phases of major design project and will undoubtedly gain a vast amount of technical knowledge, and teamwork experience. 1.2 Project Background When manufacturing paper it is critical to insure all areas of the paper have consistent moisture content. To accomplish this Potlatch Mill uses a set of high quality infrared paper dryers manufactured by Compact Engineering Ltd. The infrared dryers dry the paper well; however the switching algorithm creates less than ideal power quality. A previous capstone design team has created an improved control algorithm to correct the poor power quality. It will be the goal of this design team to scale the algorithm up to control all dryer zones, and to integrate the controller into Potlatch s number one paper machine. 1.3 Deliverables A controller capable of controlling 96 dryer zones. A scaled model operating on 480 volt 3 phase power to verify operation Schematics and drawings of the controller and model. Provide the Potlatch Corporation with test and verification data both before and after the new controller is installed. 2. Justify the Project 2.1 Why? The project should be done in order to save Potlatch time and money by creating a more efficient system in which protective circuits are not tripped. This system will also reduce the stress on the equipment and conform to power quality standards. 1

3 2.2. Benefits Final design will stop the protective circuitry from kicking on, enabling the works to continue with their regular job rather than having to reset the machine and get it running again. When the protective circuitry kicks on it costs Potlatch about $20k/hr and takes about four hours to get the system up and running again. This project could potentially open a market for the control system used with Compact s Dryers. The completion of this project will reflect highly on the Capstone program, if Potlatch is happy it could open doors for future projects. This project will make the University of Idaho s engineering program look good. Experience is a highly valued quality in the engineering job market. This experience will help members of the team in future design project and obtaining a job Investments & Costs Investments Financial payment from the client of $7000. Costs Hardware and Supplies. Materials, supplies, travel, instruments, photocopying, posters. Facilities: Shop $25 per hour. Engineering Time: Student $50 per hour, faculty $150 per hour, mentor $100 per hour. - Estimated cost for test materials = $ Four 10 hours per week each for twenty-four weeks = $48, Dr. 5 hours per week for twenty-four weeks = $18, Total Estimated Cost = $68, Return on Investment (ROI) This project is worthwhile due to the learning experience each team member will undergo. Each team member will learn about the design process and how to take a project from an idea to a completed product. The project will also give team members the opportunity to become more acquainted with people in the industry such as Dr. Law and engineers at Compact and Potlatch. The final design should improve the process of making paper. 2

4 3. Team Formation Goal Integrating the controller developed by team 1 in to Potlatch s No. 1 paper machine. To learn how to produce projects or jobs in engineering. To learn to put into practice engineering skills Expectations What does each team member want out of this project? Jay To learn how to be professionally involved with a company on an engineering level. To have practice at developing and producing an engineering project on a professional level. Rob To learn more efficient ways to work as a team for a common goal Gain experience working on a long, detailed project, managing time, tasks, and other details. Carl To gain experience communicating with a client on a major engineering project. Gain experience documenting and testing a final product. Blake Gain experience in gathering requirements, setting up a test apparatus for proof of concept, final product testing, and delivering a final product. Gain more experience in properly documenting research and project information. What does each team member expect from other team members? Jay To have cooperation and enthusiasm for the project, with an understanding of other commitments team members have. Honesty in understanding of all project aspects. Blake I expect teammates to follow instructions and comply to a commitment once the commitment has been made. I expect each member of the team to put forth an equal effort and not to have teammates relying on other teammates to do all the work 3

5 Accountability There is a need to hold individuals accountable to the team because the outcome of an individual s work affects the team and the client. Therefore it is necessary to have members of the team comply, to the best of their ability, with the materials and information needed at each step of the project development. Roles Assessment Webmaster: Rob Schaerer Main team contact: Blake Peck Team secretary: Carl Lee Undeclared at moment: Jay Hudkins The first step in assessment is team or peer vote on the need for quality checks on any portion of the project. If there is continued disagreement the next step will be to arbitrate with a faculty member. Rules No one is absolutely right Communication in key to understanding and learning from other team members Do your job. All rules are subject to change and expansion on the needs of the team 4. Exploring the Project 4.1. Client and Stakeholder Interview Questions People Who is going to do what on the project? What areas of expertise does each member bring? How available will the client be? How much will the previous group be available to fill us in? Who can we contact at Compact Engineering (or can we)? 4

6 Constraints Functions Scope Does a specific interface need to exist for the plant? How much power fluctuation can exist? What form does the input follow? What is Compact s standard? How fast does the scheme need to operate? Will there need to be a manual for assisting in operation or maintenance? How will the output be connected to the lamps, etc.? How much money do we have to work with? Are there deadlines at which the client wants to see parts of the project? Does the client want to do reviews of our progress? How often? When will the actual implementation of this take place? Existing knowledge Will additional refinements be required to get the desired resulting current waveforms? What part of the existing design will be applicable to our design? Are there suggestions on what path we should take based on the previous design or other ideas? 4.2 Research and Learning Needs Technical Knowledge We will need to learn how the paper dryers work, specifically Compact s communication protocol and system interface requirements. Does Compact s system use the RS485 communication standard? Most of the control algorithm is already developed, we need to understand how it operates and how it is implemented. We will also need to understand how to modify the model using FPGA s or Microcontrollers. Interdisciplinary Topics Since we have little experience with the paper industry, we should explore how the industry operates to have a better understanding of how the plant works in general. 5

7 Codes and Standards We will need to look into any IEEE codes and standards on power quality. Also, we should explore any other standards or codes that may affect safety or other aspects of the project. 5. Capstone Instructor Sign Off The forms required for sign off have been printed and are ready for signing. 6. Client Interview The client interview is scheduled for Thursday October 6 th 2005 at 8:30 am. 7. Assessment of Phase Zero Strengths We were able to effectively divide the work between team members, roles were easily established and no quarrels were created. Maintained communication between team members to insure work was completed on time and correctly. Improvements We need to be somewhat more efficient during team meetings. One example was one person compile a document while everyone else watched and waited. This could have been done much more efficiently outside of the meeting. This was probably due to an organization error. This could have been fixed by assigning three people to write the different portions of the document and then having the fourth person merge the separate portions in to a finalized, formatted document. Insights Meeting with the previous group provided much insight about the tasks at hand, and will guide us through the year. Maintaining open communication between team members is essential to a successful report. 6

Designing a Computer to Play Nim: A Mini-Capstone Project in Digital Design I

Designing a Computer to Play Nim: A Mini-Capstone Project in Digital Design I Session 1793 Designing a Computer to Play Nim: A Mini-Capstone Project in Digital Design I John Greco, Ph.D. Department of Electrical and Computer Engineering Lafayette College Easton, PA 18042 Abstract

More information

Major Milestones, Team Activities, and Individual Deliverables

Major Milestones, Team Activities, and Individual Deliverables Major Milestones, Team Activities, and Individual Deliverables Milestone #1: Team Semester Proposal Your team should write a proposal that describes project objectives, existing relevant technology, engineering

More information

Examining the Structure of a Multidisciplinary Engineering Capstone Design Program

Examining the Structure of a Multidisciplinary Engineering Capstone Design Program Paper ID #9172 Examining the Structure of a Multidisciplinary Engineering Capstone Design Program Mr. Bob Rhoads, The Ohio State University Bob Rhoads received his BS in Mechanical Engineering from The

More information

EEAS 101 BASIC WIRING AND CIRCUIT DESIGN. Electrical Principles and Practices Text 3 nd Edition, Glen Mazur & Peter Zurlis

EEAS 101 BASIC WIRING AND CIRCUIT DESIGN. Electrical Principles and Practices Text 3 nd Edition, Glen Mazur & Peter Zurlis EEAS 101 REQUIRED MATERIALS: TEXTBOOK: WORKBOOK: Electrical Principles and Practices Text 3 nd Edition, Glen Mazur & Peter Zurlis Electrical Principles and Practices Workbook 3 nd Edition, Glen Mazur &

More information

Using a PLC+Flowchart Programming to Engage STEM Interest

Using a PLC+Flowchart Programming to Engage STEM Interest Paper ID #16793 Using a PLC+Flowchart Programming to Engage STEM Interest Prof. Alka R Harriger, Purdue University, West Lafayette Alka Harriger joined the faculty of the Computer and Information Technology

More information

Software Maintenance

Software Maintenance 1 What is Software Maintenance? Software Maintenance is a very broad activity that includes error corrections, enhancements of capabilities, deletion of obsolete capabilities, and optimization. 2 Categories

More information

Registration Fee: $1490/Member, $1865/Non-member Registration Deadline: August 15, 2014 *Please see Tuition Policies on the following page

Registration Fee: $1490/Member, $1865/Non-member Registration Deadline: August 15, 2014 *Please see Tuition Policies on the following page DHI Online Education Registration Form AHC215 Writing Hardware Specifications August 21, 2014 December 4, 2014 This course will be presented online: http://edu.dhi.org Registration Fee: $1490/Member, $1865/Non-member

More information

SAMPLE. PJM410: Assessing and Managing Risk. Course Description and Outcomes. Participation & Attendance. Credit Hours: 3

SAMPLE. PJM410: Assessing and Managing Risk. Course Description and Outcomes. Participation & Attendance. Credit Hours: 3 PJM410: Assessing and Managing Risk Credit Hours: 3 Contact Hours: This is a 3 credit course, offered in accelerated format. This means that 16 weeks of material is covered in 8 weeks. The exact number

More information

CS 100: Principles of Computing

CS 100: Principles of Computing CS 100: Principles of Computing Kevin Molloy August 29, 2017 1 Basic Course Information 1.1 Prerequisites: None 1.2 General Education Fulfills Mason Core requirement in Information Technology (ALL). 1.3

More information

Manual for the internship visa program of the Fulbright Center

Manual for the internship visa program of the Fulbright Center Manual for the internship visa program of the Fulbright Center Introduction To gain work experience by doing an internship at a US company or non-profit organization is very useful. It may be a strong

More information

TEACHING IN THE TECH-LAB USING THE SOFTWARE FACTORY METHOD *

TEACHING IN THE TECH-LAB USING THE SOFTWARE FACTORY METHOD * TEACHING IN THE TECH-LAB USING THE SOFTWARE FACTORY METHOD * Alejandro Bia 1, Ramón P. Ñeco 2 1 Centro de Investigación Operativa, Universidad Miguel Hernández 2 Depto. de Ingeniería de Sistemas y Automática,

More information

ELEC3117 Electrical Engineering Design

ELEC3117 Electrical Engineering Design ELEC3117 Electrical Engineering Design Course Outline Semester 2, 2015 Course Staff Course Convener: Project Coordinator: Dr. Alex von Brasch, Room EE338, a.vonbrasch@unsw.edu.au Luke Dolan, lukedolan42@gmail.com

More information

Handbook for Graduate Students in TESL and Applied Linguistics Programs

Handbook for Graduate Students in TESL and Applied Linguistics Programs Handbook for Graduate Students in TESL and Applied Linguistics Programs Section A Section B Section C Section D M.A. in Teaching English as a Second Language (MA-TESL) Ph.D. in Applied Linguistics (PhD

More information

Designing a Rubric to Assess the Modelling Phase of Student Design Projects in Upper Year Engineering Courses

Designing a Rubric to Assess the Modelling Phase of Student Design Projects in Upper Year Engineering Courses Designing a Rubric to Assess the Modelling Phase of Student Design Projects in Upper Year Engineering Courses Thomas F.C. Woodhall Masters Candidate in Civil Engineering Queen s University at Kingston,

More information

Circuit Simulators: A Revolutionary E-Learning Platform

Circuit Simulators: A Revolutionary E-Learning Platform Circuit Simulators: A Revolutionary E-Learning Platform Mahi Itagi Padre Conceicao College of Engineering, Verna, Goa, India. itagimahi@gmail.com Akhil Deshpande Gogte Institute of Technology, Udyambag,

More information

Guidelines for the Use of the Continuing Education Unit (CEU)

Guidelines for the Use of the Continuing Education Unit (CEU) Guidelines for the Use of the Continuing Education Unit (CEU) The UNC Policy Manual The essential educational mission of the University is augmented through a broad range of activities generally categorized

More information

Briefing document CII Continuing Professional Development (CPD) scheme.

Briefing document CII Continuing Professional Development (CPD) scheme. Briefing document CII Continuing Professional Development (CPD) scheme www.thepfs.org 2 Contents 3 What is Continuing Professional Development > 4 Who needs to complete the CII CPD scheme > 5 What does

More information

CS 3516: Computer Networks

CS 3516: Computer Networks Welcome to CS 3516: Computer Networks Prof. Yanhua Li Time: 9:00am 9:50am M, T, R, and F Location: Fuller 320 Fall 2016 A-term 2 Road map 1. Class Staff 2. Class Information 3. Class Composition 4. Official

More information

Individual Interdisciplinary Doctoral Program Faculty/Student HANDBOOK

Individual Interdisciplinary Doctoral Program Faculty/Student HANDBOOK Individual Interdisciplinary Doctoral Program at Washington State University 2017-2018 Faculty/Student HANDBOOK Revised August 2017 For information on the Individual Interdisciplinary Doctoral Program

More information

Execution Plan for Software Engineering Education in Taiwan

Execution Plan for Software Engineering Education in Taiwan 2012 19th Asia-Pacific Software Engineering Conference Execution Plan for Software Engineering Education in Taiwan Jonathan Lee 1, Alan Liu 2, Yu Chin Cheng 3, Shang-Pin Ma 4, and Shin-Jie Lee 1 1 Department

More information

DEPARTMENT OF KINESIOLOGY AND SPORT MANAGEMENT

DEPARTMENT OF KINESIOLOGY AND SPORT MANAGEMENT DEPARTMENT OF KINESIOLOGY AND SPORT MANAGEMENT Undergraduate Sport Management Internship Guide SPMT 4076 (Version 2017.1) Box 43011 Lubbock, TX 79409-3011 Phone: (806) 834-2905 Email: Diane.nichols@ttu.edu

More information

Program Review

Program Review De Anza College, Cupertino, CA 1 Description and Mission of the Program A) The Manufacturing and CNC Program (MCNC) offers broad yet in-depth curriculum that imparts a strong foundation for direct employment

More information

Practical Integrated Learning for Machine Element Design

Practical Integrated Learning for Machine Element Design Practical Integrated Learning for Machine Element Design Manop Tantrabandit * Abstract----There are many possible methods to implement the practical-approach-based integrated learning, in which all participants,

More information

Prof. Dr. Hussein I. Anis

Prof. Dr. Hussein I. Anis Curriculum Vitae Prof. Dr. Hussein I. Anis 1 Personal Data Full Name : Hussein Ibrahim Anis Date of Birth : November 20, 1945 Nationality : Egyptian Present Occupation : Professor, Electrical Power & Machines

More information

Course Syllabus. Alternatively, a student can schedule an appointment by .

Course Syllabus. Alternatively, a student can schedule an appointment by  . Course Syllabus Course Information Course Number/Section CS/SE 6301.006 Course Title Virtual Reality Term Spring 2013 Days & Times Tues & Thurs 1:00pm 2:15pm; JO 3.516 Professor Contact Information Professor

More information

DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far

DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far DfEE/DATA CAD/CAM in Schools Initiative - A Success Story so Far Abstract This paper explains the structure and early development of the government's major initiative to develop CAD/CAM in schools as part

More information

FRANKLIN D. CHAMBERS,

FRANKLIN D. CHAMBERS, CURRICULUM VITAE FRANKLIN D. CHAMBERS, Ph.D. EDUCATIONAL BACKGROUND Doctor of Philosophy: Organizational Communications Howard University, Washington, D.C. Masters Degree: Educational Administration Howard

More information

GUIDE TO EVALUATING DISTANCE EDUCATION AND CORRESPONDENCE EDUCATION

GUIDE TO EVALUATING DISTANCE EDUCATION AND CORRESPONDENCE EDUCATION GUIDE TO EVALUATING DISTANCE EDUCATION AND CORRESPONDENCE EDUCATION A Publication of the Accrediting Commission For Community and Junior Colleges Western Association of Schools and Colleges For use in

More information

GACE Computer Science Assessment Test at a Glance

GACE Computer Science Assessment Test at a Glance GACE Computer Science Assessment Test at a Glance Updated May 2017 See the GACE Computer Science Assessment Study Companion for practice questions and preparation resources. Assessment Name Computer Science

More information

New Paths to Learning with Chromebooks

New Paths to Learning with Chromebooks Thought Leadership Paper Samsung New Paths to Learning with Chromebooks Economical, cloud-connected computer alternatives open new opportunities for every student Research provided by As Computers Play

More information

Physics 270: Experimental Physics

Physics 270: Experimental Physics 2017 edition Lab Manual Physics 270 3 Physics 270: Experimental Physics Lecture: Lab: Instructor: Office: Email: Tuesdays, 2 3:50 PM Thursdays, 2 4:50 PM Dr. Uttam Manna 313C Moulton Hall umanna@ilstu.edu

More information

RESEARCH INTEGRITY AND SCHOLARSHIP POLICY

RESEARCH INTEGRITY AND SCHOLARSHIP POLICY POLICY AND PROCEDURE MANUAL Policy Title: Policy Section: Effective Date: Supersedes: RESEARCH INTEGRITY AND SCHOLARSHIP POLICY APPLIED RESEARCH 2012 08 28 Area of Responsibility: STRATEGIC PLANNING Policy

More information

SYLLABUS. EC 322 Intermediate Macroeconomics Fall 2012

SYLLABUS. EC 322 Intermediate Macroeconomics Fall 2012 SYLLABUS EC 322 Intermediate Macroeconomics Fall 2012 Location: Online Instructor: Christopher Westley Office: 112A Merrill Phone: 782-5392 Office hours: Tues and Thur, 12:30-2:30, Thur 4:00-5:00, or by

More information

Mathematics Program Assessment Plan

Mathematics Program Assessment Plan Mathematics Program Assessment Plan Introduction This assessment plan is tentative and will continue to be refined as needed to best fit the requirements of the Board of Regent s and UAS Program Review

More information

AC : TEACHING COLLEGE PHYSICS

AC : TEACHING COLLEGE PHYSICS AC 2012-5386: TEACHING COLLEGE PHYSICS Dr. Bert Pariser, Technical Career Institutes Bert Pariser is a faculty member in the Electronic Engineering Technology and the Computer Science Technology departments

More information

Enhancing Learning with a Poster Session in Engineering Economy

Enhancing Learning with a Poster Session in Engineering Economy 1339 Enhancing Learning with a Poster Session in Engineering Economy Karen E. Schmahl, Christine D. Noble Miami University Abstract This paper outlines the process and benefits of using a case analysis

More information

Electrical Testing Equipment Performance Rubrics

Electrical Testing Equipment Performance Rubrics Name: Level: Electrical Testing Equipment Performance Rubrics (NOCTI Remediation) Program Of Study Task # Date 11 12 Identify and safely use a multi-meter. Identify and safely use a continuity tester.

More information

Reference to Tenure track faculty in this document includes tenured faculty, unless otherwise noted.

Reference to Tenure track faculty in this document includes tenured faculty, unless otherwise noted. PHILOSOPHY DEPARTMENT FACULTY DEVELOPMENT and EVALUATION MANUAL Approved by Philosophy Department April 14, 2011 Approved by the Office of the Provost June 30, 2011 The Department of Philosophy Faculty

More information

Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter

Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter Process improvement, The Agile Way! By Ben Linders Published in Methods and Tools, winter 2010. http://www.methodsandtools.com/ Summary Business needs for process improvement projects are changing. Organizations

More information

EDEXCEL NATIONALS UNIT 25 PROGRAMMABLE LOGIC CONTROLLERS. ASSIGNMENT No.1 SELECTION CRITERIA

EDEXCEL NATIONALS UNIT 25 PROGRAMMABLE LOGIC CONTROLLERS. ASSIGNMENT No.1 SELECTION CRITERIA EDEXCEL NATIONALS UNIT 25 PROGRAMMABLE LOGIC CONTROLLERS ASSIGNMENT No.1 SELECTION CRITERIA NAME: I agree to the assessment as contained in this assignment. I confirm that the work submitted is my own

More information

Internship Department. Sigma + Internship. Supervisor Internship Guide

Internship Department. Sigma + Internship. Supervisor Internship Guide Internship Department Sigma + Internship Supervisor Internship Guide April 2016 Content The place of an internship in the university curriculum... 3 Various Tasks Expected in an Internship... 3 Competencies

More information

On Human Computer Interaction, HCI. Dr. Saif al Zahir Electrical and Computer Engineering Department UBC

On Human Computer Interaction, HCI. Dr. Saif al Zahir Electrical and Computer Engineering Department UBC On Human Computer Interaction, HCI Dr. Saif al Zahir Electrical and Computer Engineering Department UBC Human Computer Interaction HCI HCI is the study of people, computer technology, and the ways these

More information

ENEE 302h: Digital Electronics, Fall 2005 Prof. Bruce Jacob

ENEE 302h: Digital Electronics, Fall 2005 Prof. Bruce Jacob Course Syllabus ENEE 302h: Digital Electronics, Fall 2005 Prof. Bruce Jacob 1. Basic Information Time & Place Lecture: TuTh 2:00 3:15 pm, CSIC-3118 Discussion Section: Mon 12:00 12:50pm, EGR-1104 Professor

More information

PROJECT DESCRIPTION SLAM

PROJECT DESCRIPTION SLAM PROJECT DESCRIPTION SLAM STUDENT LEADERSHIP ADVANCEMENT MOBILITY 1 Introduction The SLAM project, or Student Leadership Advancement Mobility project, started as collaboration between ENAS (European Network

More information

MGMT 479 (Hybrid) Strategic Management

MGMT 479 (Hybrid) Strategic Management Columbia College Online Campus P a g e 1 MGMT 479 (Hybrid) Strategic Management Late Fall 15/12 October 26, 2015 December 19, 2015 Course Description Culminating experience/capstone course for majors in

More information

AC : FACILITATING VERTICALLY INTEGRATED DESIGN TEAMS

AC : FACILITATING VERTICALLY INTEGRATED DESIGN TEAMS AC 2009-2202: FACILITATING VERTICALLY INTEGRATED DESIGN TEAMS Gregory Bucks, Purdue University Greg Bucks is a Ph.D. candidate in Engineering Education at Purdue University with an expected graduation

More information

MGMT 5303 Corporate and Business Strategy Spring 2016

MGMT 5303 Corporate and Business Strategy Spring 2016 Instructor: Dr. Scott Johnson Associate Professor William S. Spears Chair in Business Management Department MGMT 5303 Corporate and Business Strategy Spring 2016 Contact Information: Office: 320 Business

More information

A Hands-on First-year Electrical Engineering Introduction Course

A Hands-on First-year Electrical Engineering Introduction Course Paper ID #19997 A Hands-on First-year Electrical Engineering Introduction Course Dr. Ying Lin, Western Washington University Ying Lin has been with the faculty of Engineering and Design Department at Western

More information

The Policymaking Process Course Syllabus

The Policymaking Process Course Syllabus The Policymaking Process Course Syllabus GOVT 4370 Policy Making Process Fall 2007 Paul J. Bonicelli, PhD Assistant Administrator United States Agency for International Development (USAID) 1300 Pennsylvania

More information

OKURA SETS UP GLOBAL BUSINESS HEADQUARTERS IN SINGAPORE

OKURA SETS UP GLOBAL BUSINESS HEADQUARTERS IN SINGAPORE PRESS RELEASE Information Embargoed till 30 October 2009, 1030 hours OKURA SETS UP GLOBAL BUSINESS HEADQUARTERS IN SINGAPORE 1. The Okura Group of Companies will upgrade its current operations in Singapore

More information

Program Assessment and Alignment

Program Assessment and Alignment Program Assessment and Alignment Lieutenant Colonel Daniel J. McCarthy, Assistant Professor Lieutenant Colonel Michael J. Kwinn, Jr., PhD, Associate Professor Department of Systems Engineering United States

More information

IMPORTANT STEPS WHEN BUILDING A NEW TEAM

IMPORTANT STEPS WHEN BUILDING A NEW TEAM IMPORTANT STEPS WHEN BUILDING A NEW TEAM This article outlines essential steps in forming a new team. These steps are also useful for existing teams that are interested in assessing their format and effectiveness.

More information

ENME 605 Advanced Control Systems, Fall 2015 Department of Mechanical Engineering

ENME 605 Advanced Control Systems, Fall 2015 Department of Mechanical Engineering ENME 605 Advanced Control Systems, Fall 2015 Department of Mechanical Engineering Lecture Details Instructor Course Objectives Tuesday and Thursday, 4:00 pm to 5:15 pm Information Technology and Engineering

More information

AGN 331 Soil Science Lecture & Laboratory Face to Face Version, Spring, 2012 Syllabus

AGN 331 Soil Science Lecture & Laboratory Face to Face Version, Spring, 2012 Syllabus AGN 331 Soil Science Lecture & Laboratory Face to Face Version, Spring, 2012 Syllabus Contact Information: J. Leon Young Office number: 936-468-4544 Soil Plant Analysis Lab: 936-468-4500 Agriculture Department,

More information

CS Course Missive

CS Course Missive CS15 2017 Course Missive 1 Introduction 2 The Staff 3 Course Material 4 How to be Successful in CS15 5 Grading 6 Collaboration 7 Changes and Feedback 1 Introduction Welcome to CS15, Introduction to Object-Oriented

More information

Computer Science and Information Technology 2 rd Assessment Cycle

Computer Science and Information Technology 2 rd Assessment Cycle Assessment of Student Learning Computer Science and Information Technology 2 rd Assessment Cycle 2012-2015 Assessment Plan Background Introduction to Computers and Information Processing provides students

More information

Teacher of English. MPS/UPS Information for Applicants

Teacher of English. MPS/UPS Information for Applicants Teacher of English MPS/UPS Information for Applicants Start date : Easter or September 2018 Weavers Academy Striving for success, focusing on learning Dear Applicant Thank you for showing an interest in

More information

Mock Trial Preparation In-Class Assignment to Prepare Direct and Cross Examination Roles 25 September 2015 DIRECT EXAMINATION

Mock Trial Preparation In-Class Assignment to Prepare Direct and Cross Examination Roles 25 September 2015 DIRECT EXAMINATION Mock Trial Preparation In-Class Assignment to Prepare Direct and Cross Examination Roles 25 September 2015 DIRECT EXAMINATION To prepare direct examination questions: 1. Determine your theory of the case.

More information

FORT HAYS STATE UNIVERSITY AT DODGE CITY

FORT HAYS STATE UNIVERSITY AT DODGE CITY FORT HAYS STATE UNIVERSITY AT DODGE CITY INTRODUCTION Economic prosperity for individuals and the state relies on an educated workforce. For Kansans to succeed in the workforce, they must have an education

More information

How to Secure Five Offers

How to Secure Five Offers How to Secure Five Offers UCAS and Personal Statements Hannah Dunlop Higher Education Adviser (South East) University of East Anglia 1 Introduction 1 Introduction 2 Applying through UCAS Course search

More information

Fulltime MSc Real Estate and MSc Real Estate Finance Programmes: An Introduction

Fulltime MSc Real Estate and MSc Real Estate Finance Programmes: An Introduction Real Estate & Planning Fulltime MSc Real Estate and MSc Real Estate Finance Programmes: An Introduction 04 February 2013 Henley Business School 2008 www.henley.reading.ac.uk Why Study Real Estate at Reading?

More information

Graduate Student Travel Award

Graduate Student Travel Award Minimum Requirements for Eligibility: Graduate Student Travel Award 2016-2017 The applicant must provide travel-related information in a timely basis to the administrative staff and complete the UTRGV

More information

Session H1B Teaching Introductory Electrical Engineering: Project-Based Learning Experience

Session H1B Teaching Introductory Electrical Engineering: Project-Based Learning Experience Teaching Introductory Electrical Engineering: Project-Based Learning Experience Chi-Un Lei, Hayden Kwok-Hay So, Edmund Y. Lam, Kenneth Kin-Yip Wong, Ricky Yu-Kwong Kwok Department of Electrical and Electronic

More information

Process to Identify Minimum Passing Criteria and Objective Evidence in Support of ABET EC2000 Criteria Fulfillment

Process to Identify Minimum Passing Criteria and Objective Evidence in Support of ABET EC2000 Criteria Fulfillment Session 2532 Process to Identify Minimum Passing Criteria and Objective Evidence in Support of ABET EC2000 Criteria Fulfillment Dr. Fong Mak, Dr. Stephen Frezza Department of Electrical and Computer Engineering

More information

STRATEGIC LEADERSHIP PROCESSES

STRATEGIC LEADERSHIP PROCESSES STRATEGIC LEADERSHIP PROCESSES COURSE: MANA 5345.060, Fall 2016 (Online Class) DURATION: Start Date: 08/29/2016 End Date: 12/17/2016 FACULTY: TEXTBOOK: Dr. Marina Astakhova, PhD Office: BUS 123 Phone:

More information

ECE-492 SENIOR ADVANCED DESIGN PROJECT

ECE-492 SENIOR ADVANCED DESIGN PROJECT ECE-492 SENIOR ADVANCED DESIGN PROJECT Meeting #3 1 ECE-492 Meeting#3 Q1: Who is not on a team? Q2: Which students/teams still did not select a topic? 2 ENGINEERING DESIGN You have studied a great deal

More information

MASTER OF EDUCATION DEGREE: PHYSICAL EDUCATION GRADUATE MANUAL

MASTER OF EDUCATION DEGREE: PHYSICAL EDUCATION GRADUATE MANUAL MASTER OF EDUCATION DEGREE: PHYSICAL EDUCATION GRADUATE MANUAL DEPARTMENT OF HEALTH, HUMAN PERFORMANCE & RECREATION November 2017 M.Ed. in Physical Education University of Arkansas Introduction The Master

More information

Arizona GEAR UP hiring for Summer Leadership Academy 2017

Arizona GEAR UP hiring for Summer Leadership Academy 2017 GEAR UP Summer Leadership Academy (GUSLA) Arizona GEAR UP hiring for Summer Leadership Academy 2017 NAU/AZ GEAR UP will host a six (6) day summer enrichment experience for GEAR UP students on the NAU Mountain

More information

How to Judge the Quality of an Objective Classroom Test

How to Judge the Quality of an Objective Classroom Test How to Judge the Quality of an Objective Classroom Test Technical Bulletin #6 Evaluation and Examination Service The University of Iowa (319) 335-0356 HOW TO JUDGE THE QUALITY OF AN OBJECTIVE CLASSROOM

More information

BSW Student Performance Review Process

BSW Student Performance Review Process BSW Student Performance Review Process Students are continuously evaluated in the classroom, the university setting, and field placements to determine their suitability for the social work profession.

More information

Greek Life Code of Conduct For NPHC Organizations (This document is an addendum to the Student Code of Conduct)

Greek Life Code of Conduct For NPHC Organizations (This document is an addendum to the Student Code of Conduct) Greek Life Code of Conduct For NPHC Organizations (This document is an addendum to the Student Code of Conduct) The Office of the Dean of Students offers undergraduate students an experience that complements

More information

Local Activism: Identifying Community Activists (2 hours 30 minutes)

Local Activism: Identifying Community Activists (2 hours 30 minutes) Local Activism: Identifying Community Activists (2 hours 30 minutes) Local Activism Series Staff Skill Building Library Raising Voices This module is part of a Staff Skill Building Library developed by

More information

ENGINEERING DESIGN BY RUDOLPH J. EGGERT DOWNLOAD EBOOK : ENGINEERING DESIGN BY RUDOLPH J. EGGERT PDF

ENGINEERING DESIGN BY RUDOLPH J. EGGERT DOWNLOAD EBOOK : ENGINEERING DESIGN BY RUDOLPH J. EGGERT PDF Read Online and Download Ebook ENGINEERING DESIGN BY RUDOLPH J. EGGERT DOWNLOAD EBOOK : ENGINEERING DESIGN BY RUDOLPH J. EGGERT PDF Click link bellow and free register to download ebook: ENGINEERING DESIGN

More information

Guidelines for Completion of an Application for Temporary Licence under Section 24 of the Architects Act R.S.O. 1990

Guidelines for Completion of an Application for Temporary Licence under Section 24 of the Architects Act R.S.O. 1990 Guidelines for Completion of an Application for Temporary Licence under Section 24 of the Architects Act R.S.O. 1990 OAA-12-16 1 INDEX Page Number General... 3 Fees for Temporary Licence... 4 Appendix

More information

GRAND CHALLENGES SCHOLARS PROGRAM

GRAND CHALLENGES SCHOLARS PROGRAM GRAND CHALLENGES SCHOLARS PROGRAM COLLEGE OF Engineering, Architecture and Technology GRAND CHALLENGES AT OKLAHOMA STATE The College of Engineering, Architecture and Technology (CEAT) Grand Challenge Scholars

More information

Computer Science 141: Computing Hardware Course Information Fall 2012

Computer Science 141: Computing Hardware Course Information Fall 2012 Computer Science 141: Computing Hardware Course Information Fall 2012 September 4, 2012 1 Outline The main emphasis of this course is on the basic concepts of digital computing hardware and fundamental

More information

Syllabus Fall 2014 Earth Science 130: Introduction to Oceanography

Syllabus Fall 2014 Earth Science 130: Introduction to Oceanography Syllabus Fall 2014 Earth Science 130: Introduction to Oceanography Background Information Welcome Aboard! These guidelines establish specific requirements, grading criteria, descriptions of assignments

More information

IT Project List. Description

IT Project List. Description PID 270 Early Alert Appointment Tracking for Students (SARS) In Progress 110.1 13 14 The implementation of the SARS package will allow integration of essential components of GRCC's institutional student

More information

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS

IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS C2ER / LMI INSTITUTE IMPROVED MANUFACTURING PROGRAM ALIGNMENT W/ PBOS JUNE 09 2016 US DEPARTMENT OF LABOR MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM MULTI-STATE ADVANCED MANUFACTURING CONSORTIUM Introductions

More information

Andover USD #385 Elementary Band HANDBOOK

Andover USD #385 Elementary Band HANDBOOK Andover USD #385 Elementary Band HANDBOOK 2007-2008 Craig Gray Kevin Brightup ACHS/ACMS ACHS/ACMS 266-8822 266-8845 ext 8147 grayc@usd385.org brightuk@usd385.org Joe Emery ACHS/ACMS 266-8822 emeryj@usd385.org

More information

ABHINAV NATIONAL MONTHLY REFEREED JOURNAL OF RESEARCH IN COMMERCE & MANAGEMENT

ABHINAV NATIONAL MONTHLY REFEREED JOURNAL OF RESEARCH IN COMMERCE & MANAGEMENT INDUSTRIAL REQUIREMENT AND COMMERCE EDUCATION IN GLOBALIZATION Dhaval Desai Ph. D. Scholar, Pacific University, Udaipur, India Email: dhaval_mdt@yahoo.in ABSTRACT The growing phenomenon of globalization,

More information

USC VITERBI SCHOOL OF ENGINEERING

USC VITERBI SCHOOL OF ENGINEERING USC VITERBI SCHOOL OF ENGINEERING APPOINTMENTS, PROMOTIONS AND TENURE (APT) GUIDELINES Office of the Dean USC Viterbi School of Engineering OHE 200- MC 1450 Revised 2016 PREFACE This document serves as

More information

PSYCHOLOGY 353: SOCIAL AND PERSONALITY DEVELOPMENT IN CHILDREN SPRING 2006

PSYCHOLOGY 353: SOCIAL AND PERSONALITY DEVELOPMENT IN CHILDREN SPRING 2006 PSYCHOLOGY 353: SOCIAL AND PERSONALITY DEVELOPMENT IN CHILDREN SPRING 2006 INSTRUCTOR: OFFICE: Dr. Elaine Blakemore Neff 388A TELEPHONE: 481-6400 E-MAIL: OFFICE HOURS: TEXTBOOK: READINGS: WEB PAGE: blakemor@ipfw.edu

More information

Unit: Human Impact Differentiated (Tiered) Task How Does Human Activity Impact Soil Erosion?

Unit: Human Impact Differentiated (Tiered) Task How Does Human Activity Impact Soil Erosion? The following instructional plan is part of a GaDOE collection of Unit Frameworks, Performance Tasks, examples of Student Work, and Teacher Commentary. Many more GaDOE approved instructional plans are

More information

An Introduction to Simio for Beginners

An Introduction to Simio for Beginners An Introduction to Simio for Beginners C. Dennis Pegden, Ph.D. This white paper is intended to introduce Simio to a user new to simulation. It is intended for the manufacturing engineer, hospital quality

More information

The open source development model has unique characteristics that make it in some

The open source development model has unique characteristics that make it in some Is the Development Model Right for Your Organization? A roadmap to open source adoption by Ibrahim Haddad The open source development model has unique characteristics that make it in some instances a superior

More information

Management 4219 Strategic Management

Management 4219 Strategic Management Management 4219 Strategic Management Instructor: Dr. Brandon Ofem Class: Tuesday and Thursday 9:30 am 10:45 am Classroom: AB Hall 1 Office: AB Hall 216 E-mail: ofemb@umsl.edu Office Hours: Tuesday & Thursday

More information

Assessment System for M.S. in Health Professions Education (rev. 4/2011)

Assessment System for M.S. in Health Professions Education (rev. 4/2011) Assessment System for M.S. in Health Professions Education (rev. 4/2011) Health professions education programs - Conceptual framework The University of Rochester interdisciplinary program in Health Professions

More information

One Stop Student Services. Leadership Development Program Group Project Presented April 29, 2011

One Stop Student Services. Leadership Development Program Group Project Presented April 29, 2011 One Stop Student Services Leadership Development Program Group Project Presented April 29, 2011 . Team Members Aimee Nelson, Assistant Dean, Student Affairs, Education Sara Martinez, Records Manager, Admissions

More information

NSU Oceanographic Center Directions for the Thesis Track Student

NSU Oceanographic Center Directions for the Thesis Track Student NSU Oceanographic Center Directions for the Thesis Track Student This publication is designed to help students through the various stages of their Ph.D. degree. For full requirements, please consult the

More information

Online Testing - Quick Troubleshooting Tips

Online Testing - Quick Troubleshooting Tips Online Testing - Quick Troubleshooting Tips This document outlines quick troubleshooting tips for some common issues related to online testing that may impact the Test Coordinators/ Administrators or the

More information

South Carolina College- and Career-Ready Standards for Mathematics. Standards Unpacking Documents Grade 5

South Carolina College- and Career-Ready Standards for Mathematics. Standards Unpacking Documents Grade 5 South Carolina College- and Career-Ready Standards for Mathematics Standards Unpacking Documents Grade 5 South Carolina College- and Career-Ready Standards for Mathematics Standards Unpacking Documents

More information

Department of Computer Science. Program Review Self-Study

Department of Computer Science. Program Review Self-Study Department of Computer Science Program Review 2004-2005 Self-Study Verification of Faculty Review Each full-time faculty member of the Department of Computer Science has been asked to sign the following

More information

DNV GL Joint Industry Project: Decision Support for Dynamic Barrier Management

DNV GL Joint Industry Project: Decision Support for Dynamic Barrier Management DNV GL Joint Industry Project: Decision Support for Dynamic Barrier Management IADC/DEC Tech Forum Data Acquisition & Cybersecurity Bill Nelson 1 SAFER, SMARTER, GREENER DNV GL Joint Industry Project:

More information

Intermediate Algebra

Intermediate Algebra Intermediate Algebra An Individualized Approach Robert D. Hackworth Robert H. Alwin Parent s Manual 1 2005 H&H Publishing Company, Inc. 1231 Kapp Drive Clearwater, FL 33765 (727) 442-7760 (800) 366-4079

More information

Specification and Evaluation of Machine Translation Toy Systems - Criteria for laboratory assignments

Specification and Evaluation of Machine Translation Toy Systems - Criteria for laboratory assignments Specification and Evaluation of Machine Translation Toy Systems - Criteria for laboratory assignments Cristina Vertan, Walther v. Hahn University of Hamburg, Natural Language Systems Division Hamburg,

More information

Graphic Imaging Technology II - Part two of a two-year program designed to offer students skills in typesetting, art and pasteup,

Graphic Imaging Technology II - Part two of a two-year program designed to offer students skills in typesetting, art and pasteup, Architectural & Engineering Drafting/Design I - Part I of a two-year program where students in grades 11-12 gain knowledge and skills needed to become a draftsperson. Knowledge of Windows based environment

More information

Peterborough Eco Framework

Peterborough Eco Framework We would expect you to carry out an review at the start of each year to allow you to assess what progress has been made and decide which area or areas you would like to focus on. It is up to you how you

More information

Meeting Agenda for 9/6

Meeting Agenda for 9/6 1) First team meeting a. Finalize contract b. Finalize contact information 2) Finish discussion about the overall project 3) Documentation a. CAD FILES b. Papers from previous work 4) Meeting Agenda for

More information

FREQUENTLY ASKED QUESTIONS

FREQUENTLY ASKED QUESTIONS School of Physical Therapy Clinical Education FREQUENTLY ASKED QUESTIONS When do I begin the selection process for each clinical internship? The process begins at different times for each internship. In

More information